The industrial sectors from 24 to 31, the DLF Industrial Area and the plots along the Mathura Road are the most industrial market we work in. Supervisor cabins, quality rooms, canteen partitions and shop-floor glazing. The access is the best we get anywhere - ground level, wide doors, no lift. The constraint is not the building. It is the line.
Fitting around the line, not the other way round
On a plant job the question is never the lift. It is when the line stops.
Some plants want the work on the weekly off. Some want it between shifts. Some can isolate one bay while the rest runs, which is the easiest case and usually the cheapest, because the team works continuously instead of setting up and clearing away repeatedly.
So tell us the shift pattern with the enquiry rather than after the quote. It decides how many people we send and how many visits the job takes, and those are the two things that move an industrial price. Working one full weekly off is very often cheaper than several short windows, even though it sounds more disruptive.
What happens around the glass
This matters more in a plant than anywhere else, and it is worth asking about directly rather than discovering afterwards.
Grinding sparks pit glass permanently. Welding spatter does the same, and neither can be polished out. Dust settles into fresh silicone before it cures and stays there. So glass goes in near the end of a fit-out rather than the beginning.
And where there is ongoing hot work nearby, the honest answer may be that glass is the wrong material. Toughened glass is strong, but strong is not the same as suitable - it is not a spark screen and it is not a heat barrier. Where a partition would sit beside a welding bay we will say so and suggest what actually belongs there, even though that is a smaller job for us.
Supervisor cabins and quality rooms want opposite things
These two rooms often sit next to each other and are routinely quoted as one standard partition, which is how one of them ends up wrong.
A supervisor cabin is about sightlines. It wants maximum visibility onto the floor, so it is usually clear toughened glass full height, with a frosted band only where a desk needs privacy. Seeing matters more than quiet.
A quality room is the reverse. It wants dust and noise kept out, which needs proper seals at head and base, and where quiet genuinely matters, double glazing rather than single. A single sheet of toughened glass cuts far less sound than people expect, because it is rigid and sound passes straight through.
We price them as the different things they are.
