What it costs
The rate list we quote from, the nine things that change it, and four real jobs priced from start to end. We publish it so you can check any price you are given, including ours.
Rate list
Each rate is for one square foot of glass, fitted. GST is extra. Each rate comes from the real cost of the size shown next to it. So a smaller job usually costs a bit more per sq ft. A bigger job costs a bit less. The number that matters is the written price. We give you that price after we measure your site.
| Service | Sold by | Today |
|---|---|---|
| Broken Glass ReplacementRepairs | per sq ft | ₹520 |
| Movement and Hardware FixRepairs | per sq ft | ₹520 |
| Custom Glass InstallationRepairs | per sq ft | ₹520 |
| Frameless Fixed PartitionShower Cubicles | per sq ft | ₹620 |
| Frameless Fixed PanelOffice Partitions | per sq ft | ₹660 |
| Shop Front Glass with DoorOffice Partitions | per sq ft | ₹775 |
| Frameless Wall to Wall with DoorShower Cubicles | per sq ft | ₹850 |
| L-shape Frameless with DoorShower Cubicles | per sq ft | ₹850 |
| Slim Profile Wall to Wall with DoorShower Cubicles | per sq ft | ₹850 |
| Slim Profile Enclosure with DoorShower Cubicles | per sq ft | ₹850 |
| Frameless Wall to Wall with SliderShower Cubicles | per sq ft | ₹870 |
| L-shape Frameless with SliderShower Cubicles | per sq ft | ₹870 |
| Aluminium Profile Panels with DoorOffice Partitions | per sq ft | ₹1,049 |
| Frameless Panels with DoorOffice Partitions | per sq ft | ₹1,900 |
Why one build costs more than another
The same glass is cheaper per square foot on a big run than on a small one, because one door set is shared across more area.
| Type of work | Glass | Costed at | Fitted, per sq ft |
|---|---|---|---|
| Frameless fixed panel, no doorNo door and no moving parts. This is the simplest thing we build. | 10mm toughened | 3 x 7 ft | ₹620 |
| Full-height frameless cabinOne door set is shared across a lot of glass. So the rate is lower. | 12mm toughened | 10 x 8 ft, about 216 sq ft of glass | ₹620 |
| Frameless glass wallNo door here either. But this glass is thicker than a small panel needs. | 12mm toughened | 4 x 10 ft | ₹660 |
| Toughened glass shop front with doorThicker glass and heavier door parts, shared across a wide front. | 12mm toughened | 7 x 10 ft | ₹775 |
| Frameless partition with a hinged doorOur most common office cabin. Also our most common shower enclosure. | 10mm toughened | 5 x 7 ft | ₹850 |
| Frameless partition with a sliding doorThe sliding set and its track cost more than a pair of hinges. | 10mm toughened | 5 x 7 ft | ₹870 |
| Frameless partition with a concealed sliderThe track sits inside a cover. So no parts are on show. | 10mm toughened | 5 x 7 ft | ₹905 |
| Replacing broken glassWe take the broken glass away. We re-use any fittings that are still good. | matched to what is there now | any | ₹520 |
Four jobs, priced in full
Real sizes from jobs we build every week, and exactly what each price includes.
Fixed panel with no door
3 x 7 ft · 21 sq ft of glass
- 10mm clear toughened glass
- Corner clamps at the top and bottom
- Silicone at the wall and floor
₹620 / sq ft per sq ft
₹13,000
Small cabin with a hinged door
5 x 7 ft · 35 sq ft of glass
- 10mm clear toughened glass
- Glass to glass hinges in chrome
- Handle, edge seals and a top support rod
₹850 / sq ft per sq ft
₹29,800
The same cabin with a sliding door
5 x 7 ft · 35 sq ft of glass
- 10mm clear toughened glass
- Sliding set running on an aluminium track
- Brass sliding handle and wall brackets
₹870 / sq ft per sq ft
₹30,500
Shop front with an entrance door
7 x 10 ft · 70 sq ft of glass
- 12mm clear toughened glass
- Floor spring, top pivot and clamps
- Lock and H handle built for shop use
₹775 / sq ft per sq ft
₹54,300
Full-height cabin with three glass sides
10 x 8 ft room · about 216 sq ft of glass
- 12mm clear toughened glass
- Corner clamps all round and one full door set
- A site manager with you for the whole fitting
₹620 / sq ft per sq ft
₹1,33,900
The nine things that change a price
Roughly in the order they matter on a normal job.
Type of glass
Plain clear toughened glass (safety glass) is the base price. Frosted, tinted and extra-clear glass cost more. A frosted band or an etched logo is priced by the size of the area we treat.
Thickness
10mm suits most partitions and showers. We use 12mm for full-height cabins, shop fronts, and panels much over 8 feet tall. Going from 10mm to 12mm adds about ₹55 per sq ft.
How much glass
You pay for the glass, not for the floor. A 10 x 8 ft cabin with three glass sides needs about 216 sq ft of glass, not 80. Size also helps you. That same cabin costs about ₹620 per sq ft. A small 5 x 7 ft partition with the same door parts costs ₹850.
Fittings
On a small job, the fittings change the price more than anything else. A full door set costs about ₹7,500. This cost is the same for a 35 sq ft partition or a 300 sq ft one. On a small job, very little glass has to carry that cost.
Doors
A fixed panel with no door is the simplest thing we make, at about ₹620 per sq ft. Add a hinged door and the rate goes to ₹850. A sliding door adds rollers and a track. A hidden track adds even more.
Cutting and drilling
Every hole and cut-out is made before the glass is toughened. We charge for each one. A panel with a door, a lock and a handle needs much more work than a plain panel of the same size.
Delivery
Toughened glass travels upright in a frame. It cannot be cut once it leaves the factory. Delivery costs about the same for a big load or a small one. So one big delivery is cheaper than three small ones.
Fitting work
This is the time our team spends at your site. A straight partition against good walls usually takes one day. Some things add time: night work, scaffolding, or a second trip because the site was not ready.
Site conditions
Some sites take longer to work in. Walls that are not straight. Floors that are not level. Tiles we have to drill. No service lift, short working hours, or an upper floor with only stairs. Each of these adds time on site.
Parts, supplied and fitted
Each price covers the part and the work to fit it. GST is extra. The glass is not included. If we come only to fit one small item, we charge for the visit. If we fit it as part of a bigger job, we do not charge extra.
| Item | Fitted |
|---|---|
| Complete door fitting setHinges, handle, seals and a top support rod for one door. | ₹7,500 |
| Shop door fitting setFloor spring, top pivot, clamps, lock and handle. | ₹10,000 |
| Sliding set with trackRollers, aluminium track and a pull handle for one door. | ₹6,800 |
| Concealed sliding setThe track sits inside a cover, so no fittings are on show. | ₹8,400 |
| Floor spring, heavy dutyFor shop and restaurant doors that open all day. | ₹5,500 |
| Floor spring, standard dutyFor office cabin doors and other lighter doors. | ₹3,900 |
| Glass to glass hinges, pairFor a shower door that hangs on a fixed glass panel. | ₹3,600 |
| Wall to glass hinges, pairFor a shower door that hangs on a wall or on tiles. | ₹2,600 |
| Door edge seal, one doorThe strip that stops water leaking out at the door edge. | ₹950 |
| H handle for a glass door300mm on the inside, 450mm on the outside. | ₹1,100 |
| Corner clamps, eachThey hold a frameless panel at the top and bottom edges. | ₹140 |
| Top support rod, per footIt holds a tall frameless panel steady against the wall. | ₹190 |
Pricing guides
Each one answers a single question properly.
- Glass partition cost in BangaloreThe full rate list, what makes a price go up or down, and four real jobs priced in full.
- Frameless glass partition priceWhat frameless costs next to a framed one, and where the money actually goes.
- Office glass partition costCabins, meeting rooms and whole floors, priced by how much glass you need.
- Aluminium glass partition priceSlim aluminium frame systems, and when a frame works out cheaper than frameless.
- Glass door installation costThe price of a single door, from a brand new one to changing a worn door closer.
- Shower cubicle cost in BangaloreWall to wall, L-shape and sliding enclosures, and what changes the price.
Questions about price
Why does each style have a different rate?
Because each one costs a different amount to build. A fixed panel has no door parts at all. A partition with a hinged door needs a full set of parts. A sliding door costs even more. And a large cabin shares one door set across much more glass. So its rate per sq ft is the lowest of all. We work out every rate on this site from the real cost. We do not pick the numbers.
Is the rate per sq ft of glass, or per sq ft of floor?
It is per sq ft of glass. This is the main reason a price can look higher than you thought. A 10 x 8 ft cabin sounds like 80 sq ft. But if three sides have glass 8 ft tall, you are buying about 216 sq ft of glass. Your written price shows the glass area. So you can check the sum yourself.
Do these prices include GST?
No. Every rate on this site is before GST. Your written price shows the amount and the GST on separate lines. So nothing surprises you at the end.
Why does a small job cost more per sq ft than a large one?
The door set, the delivery and one day of our team's time cost about the same on any job. On a 5 x 7 ft partition, only 35 sq ft of glass carries those costs. On a full-height cabin, about 216 sq ft carries them. That is why the same kind of build drops from ₹850 to about ₹620 per sq ft.
What is the cheapest way to get this look?
A fixed glass panel with no door, at about ₹620 per sq ft. Every moving part adds cost: hinges, a lock, a door closer, a sliding set and its track. If the room works with an open doorway instead of a closing door, that is where you save.
Do you charge for coming out to measure?
Asking us for a price costs nothing. The measuring visit is part of the job, not a separate bill. We always measure. This is because toughened glass is cut to size before it is toughened. It cannot be cut again later.
How much advance do you take?
Enough to cover the materials, once you have approved the written price. Glass cut to your sizes is no use on any other job. This is why an advance is normal in this trade. You pay the rest when the work is finished.
Can the price change after you measure?
The written price is firm for the work listed on it. It changes only if the work changes. For example, different glass, an extra panel, or a door where there was an open gap. If we find something at your site that we could not see earlier, we tell you before we go on.
Prices by area
The rate is the same across the city. What changes is how we get in, and that shows up in the labour.
Bengaluru:IndiranagarWhitefieldMarathahalliBellandurSarjapur RoadDomlurUlsoorCV Raman NagarMahadevapuraHoodi & BrookefieldKR PuramKoramangalaHSR LayoutJayanagarJP NagarElectronic CityBTM LayoutBasavanagudiBanashankariBommanahalli & Hosur RoadKanakapura RoadUttarahalliMG Road & Brigade RoadShivajinagar & Commercial StreetRichmond Town & Langford TownFrazer Town & Cooke TownMalleshwaramRajajinagarVijayanagarNagarbhaviRajarajeshwari NagarKengeriYeshwanthpurPeenyaHebbalYelahankaRT NagarKalyan NagarBanaswadiHennur & ThanisandraJakkur & Sahakar NagarDevanahalli & Airport Road
Get a firm number for your job
Send the size and a photo. A rough range the same day, a written price after we measure.
