Is this the right service for your job?
Choose this for a new glass railing along a balcony, terrace or staircase.
- If an existing railing can be kept and its fittings need attention, see the Glass Railing Repair. It checks the current supports and panels before proposing a new run.
- If you want to close the open space above a railing, see the Balcony Glass Cover & Enclosure. It adds sliding glass across the opening instead of replacing the railing.
Three ways to hold the glass
Clamps are small steel grips, two or more per panel, bolted to short posts or to the side of the slab. They are the most common fixing and suit most balconies.
Posts are steel uprights fixed to the floor, with the glass held between them. They suit a long run or a staircase, where the glass changes angle.
A base channel is a metal trough along the floor edge. The glass stands in it with no posts and no clamps, so the railing reads as a clean line of glass. It needs a sound slab to bolt into. Which one we use depends on what your slab and wall allow, and we decide that at the measuring visit.
The glass and the pads
Railing glass is 12mm toughened as standard, thicker than the glass in a door or a shower. Toughened glass is safety glass. It is much stronger than plain glass, and if it ever breaks it falls in small blunt pieces.
Laminated glass, two sheets bonded together, stays in place even when broken. We fit it where you ask for it or where your society asks for it.
A rubber pad sits wherever metal grips glass. Metal touching glass directly is the commonest reason a railing panel cracks years later. Every clamp and every channel we fit has rubber in it.
Handrail or no handrail
A frameless glass railing can be finished with a steel handrail along the top, or left as bare glass with a polished edge. A handrail gives something to hold and takes a knock on the top edge. It is priced per running foot on top of the glass.
On a staircase we usually suggest a handrail. On a balcony it is your choice.
Measuring, making and fitting
Holes for clamps are drilled before the glass is toughened, so the measuring visit is exact. We measure each panel, mark the fixing positions and check that the slab or wall can carry the load.
The glass is then made to those sizes. On the fitting day the steel goes in first, and each panel is set, aligned to its neighbour and torqued to the right tightness. We load-test the run before we call it done.
A railing replaces a grille or an old railing in most cases. We take the old one away.
What it costs
The rate starts at ₹2,500 per running foot, fitted, for 12mm toughened glass on standard clamps. A base channel, laminated glass, a handrail or a staircase run moves the rate up.
A typical balcony 10 feet along its open edge is 10 running feet. You get a written price after the measuring visit, before the glass is ordered.
Where we build them
Our own teams build balcony glass railings in Bengaluru and in Delhi, Gurugram, Noida, Ghaziabad and Faridabad. We fit railings on apartment balconies, house terraces and internal staircases. Each city has its own page for this service, with the areas we reach there. For a railing that is loose or has a broken panel, see our glass railing repair and balcony glass replacement pages.













