About half of what we do in Domlur is repair work, and the pattern barely changes. It is a cabin or entrance door that slams, drifts open, or will not shut. The glass is fine. What has worn out is the closing part hidden in the floor. Changing it is a two to three hour job once we are inside.
Why the floor spring is usually the answer
A door on a Domlur office floor is opened a few hundred times a day. The floor spring is the closing part fitted into the floor. It wears out over time. As it goes, the door starts to slam, then to drift, then it will not meet its catch.
The rest is alignment. A lock out of line with its keep, a handle working loose, clamps that need tightening.
When a part truly must be replaced, we fit one made for the weight of that door and how often it is used. Fitting the same too-small part again is why some doors here fail every single year.
Getting a repair team into a managed park
Even a two hour visit needs worker IDs. In several of these buildings you also need a booked lift slot. It is usually easier to arrange than a full delivery, because nothing large is coming in, but it still has to be booked.
Tell us the building name on the first call. We will sort it with the facility desk, not at the gate.
Send a short video of the door moving before we come. That tells us more than words. It means the right part is on the van the first time, not the second.
Office aluminium windows and doors that stick or leak
An office window that drags soon becomes a window nobody opens. On an aluminium window the cause is usually the rollers, the small wheels under the sliding part. We fit a new pair and clean the track in the same job. If dust gathers on the sill while the window is shut, the rubber seals have usually worn. We change those too.
For the smaller firms in Amarjyoti Layout, we repair an aluminium door that sticks. We also fix one that lets water and dust in at the edge.
We work on uPVC windows and doors in Domlur as well. If your team wants a window open for air, we fit a mosquito net, also called mesh, on it. Tell us your office hours, and we will try to work outside them.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.
