A glass shower cubicle costs ₹620 to ₹2,330 for each square foot of glass, fitted, before GST. In plain clear glass the range is ₹620 to ₹1,045, and the type of door decides where you land. Above that you are paying for special glass: fluted glass costs more than twice as much as clear, and bent glass over three times. A typical 35 sq ft straight enclosure with a hinged door comes to about ₹29,800.
What a shower cubicle job includes
The price includes toughened glass cut to your bathroom and drilled for the fittings before it is toughened. It also includes the hinges or sliding parts, a handle, the seals, a support rod where the run needs one, the silicone, and our team fitting it all.
It does not include tiling, plumbing or a shower tray.
We measure after the tiling is finished. The size that matters is the finished tile face, not the wall behind it.
Who this is for
This guide is for owners fitting a shower enclosure in a new flat. It is also for families replacing an old enclosure that has gone cloudy or started to leak, and for landlords getting a flat ready to let.
If your building sets hours for work, tell us when you get in touch. It does not change the price, but it decides which day we can fit.
How the different shapes price out
A straight enclosure from wall to wall with a hinged door is the cheapest option with a door. It has one fixed panel, one door and two hinges. At ₹850 per sq ft, a typical 35 sq ft enclosure comes to about ₹29,800.
A sliding door suits a bathroom where a door has no room to swing. At ₹870 per sq ft, the same area comes to about ₹30,500, because the sliding parts and track cost more than hinges.
A corner enclosure starts at the same ₹850 per sq ft. It has a return panel and a corner connector, so there is more glass for the same floor, and the total is higher.
A fixed walk-in panel with no door is the simplest build, at ₹620 per sq ft. In a well-drained bathroom it is often all you need.
What the designer glass costs, and why
Everything above ₹1,045 per sq ft is the glass, or the metalwork on it. The seals, the silicone and the fitting work cost the same as on a plain enclosure.
Fluted glass has fine ribs running down it, and it costs more than twice as much as clear glass of the same thickness. A fully fluted enclosure starts at ₹1,305 per sq ft, so a 35 sq ft shower comes to about ₹45,700. Fluted glass on the fixed panel only, with a clear door, brings the rate to ₹1,085 and the same shower to about ₹38,000.
A slim matte black frame around clear glass is ₹1,235 per sq ft, or about ₹43,200. You are paying for about 34 running feet of powder-coated frame, cut and joined on site. The black grid, in the window-pane style, is ₹1,730, because it adds about 58 running feet of bar bonded to both faces and more time to set it out.
Bent glass is the big step. Each panel is formed over a steel mould made for your curve, and a panel that comes out uneven cannot be used. A curved corner enclosure starts at ₹2,010 per sq ft, about ₹80,400 for a 3 by 3 ft quadrant. A full walk-in spa room in curved 12mm glass starts at ₹2,330.
We always quote the plain version alongside, so you can see what the look is costing you.
How long it takes
Most jobs are done in 3 to 4 days from measuring to fitting. We measure once your tiling is finished.
Fitting one enclosure usually takes one day on site. After that, do not use the shower for about 24 hours, so the silicone can set. Using it the same evening is a common reason a new enclosure seems to leak in its first week.
What it is made of, and what stops the leak
10mm clear toughened glass is the usual choice, and 8mm is fine for a small fixed screen. The walk-in spa room uses 12mm. Frosted and tinted glass cost extra.
The fittings matter more here than anywhere else, because a bathroom is warm and wet every day. Hinges are glass-to-glass or wall-to-glass, in a chrome finish as standard.
The closing edge takes a proper edge seal, and that seal is what keeps the water inside. Plastic seals run along the bottom and the sides. We seal the edges at the walls and floor with bathroom-grade silicone.
What we look after
We measure after your tiling is done and make the glass to those sizes. We deliver it into your home without marking the walls, and fit and seal it with our own team. If your building needs a gate pass or a lift booking, tell us and we arrange it with you.
We give a 2-year warranty on every product we fit, and 6 months on our repair and installation work. If an enclosure leaks because of our sealing, we come back and put it right.
What happens after you get in touch
Send a photo of the bathroom and the width of the opening. The photo also tells us whether a door has room to swing.
We call you back with a range. Once the tiling is finished, we measure and give you a written price. You pay an advance for the materials, and then we fit.
