At your location in just 29 minutesGet the measurements right away.T&C

Glass work by Fabrockers in CV Raman Nagar, Bangalore

Bangalore · offices and homes

Glass & Aluminium Work in CV Raman Nagar

A tech park on one side, quiet layouts on the other, and easy access to both.

660/ sq ft starting price

Before GST. Firm price after we measure your site. Repairs and replacement glass from ₹520 per sq ft.

  • We handle the building access
  • 1-year fitting warranty
  • Site manager on every job
CV Raman Nagar enquiry

Get prices for this work

Tell us where to reach you - it takes 30 seconds.

Free to ask. Your number stays private.

KaggadasapuraByrasandraBagmane Tech Park sideDRDO LayoutOld Madras Road side

CV Raman Nagar is an easy place for us to work. The Bagmane side brings office cabins, with a proper loading area and a facility team that runs a sensible process. Behind it, Kaggadasapura, Byrasandra and the old defence layouts are low buildings on wide-enough roads. Very little here needs the planning that a Ring Road tower or an Indiranagar cross needs.

Why jobs here run to time

Access is the thing that usually costs a job days, and here it mostly does not.

On the park side there is a real loading area, so a delivery is unloaded in one go instead of being carried in from a road. In the layouts the buildings are two or three floors, and the roads take a vehicle without blocking anyone.

That shows up in the price as well as the calendar. A big part of what a fit-out costs is our team's hours on site. The hours nobody spends carrying panels from a far-off parking spot are hours you do not pay for.

The layout houses and their bathrooms

The housing here is settled: independent houses and small blocks, mostly two to four floors, and mostly without a service lift.

So panels go up the stairs by hand, and the turn in the staircase decides the largest panel we can use. We measure it on the same visit as the bathroom.

On style, these bathrooms split by age. A recently re-tiled one suits frameless, and it looks better. An original bathroom in a house twenty years old has usually settled a few millimetres. A slim aluminium frame takes that up inside the channel. We check with a level. We do not decide in advance.

Clinics and small consulting rooms

There are a lot of small clinics in this area. A consulting room is the one glass job where sound matters more than looks.

We build those differently. Full-height glass, sealed at the top and both sides, and a door that closes properly with no gap at the floor. Frosting to sill height, or a fully frosted panel, covers what people can see.

A partition that stops short of the ceiling will not hold a talk in, whatever it costs. We tell you that before you spend the money, not after.

What we do in CV Raman Nagar

Each one has its own page for this area, with the local details on it.

How a job runs

  1. Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
  2. We call you backUsually the same day. Where we can, we give you a rough price on the call. Then you know if a visit is worth your time.
  3. We come and measureWe measure the opening. We also check the walls, floor, ceiling and the way in. Your glass is made to these final sizes, so they must be right.
  4. You get a written priceIt shows the glass, the fittings and the fitting work as separate lines. If anything about the job changes, we tell you before we go ahead.
  5. We make it and fit itYou approve the price and pay the advance. Then we make your glass. Our team delivers it, fits it, checks the doors line up and clears the site.

Questions we get from CV Raman Nagar

We are in the tech park. What do you need from us?

A work permit raised by you as the tenant, our workers on the visitor list, and a slot for the material to come in. We prepare the paperwork and you sign it. Starting it the day you approve the price usually keeps it from holding up the job. Your glass takes about the same few days to make.

Our house has no lift. How big a panel can you bring up?

That depends on the turn in your staircase, which we measure on the same visit as the room. Where one panel will not make the turn, we build the run as two panels with a slim joint. You cannot spot it from a few feet away. Toughened glass cannot be cut on site, so we settle this before anything is made.

Styles we fit here

Nearby areas

Get this done in CV Raman Nagar

We measure on site and give you a firm written price before any work starts.

CV Raman Nagar enquiry

Get prices for this work

Tell us where to reach you - it takes 30 seconds.

Free to ask. Your number stays private.

CV Raman Nagar enquiry

Get prices for this work

Tell us where to reach you - it takes 30 seconds.

Free to ask. Your number stays private.