Glass repairs use different pricing units for different kinds of work. Replacement glass is usually priced by the square foot. Hardware uses a price per part, and servicing uses a visit price. Each service card shows its current starting rate and unit.
Prices and guide information: Fabrockers. Availability depends on the service; check its page for cities served.
Three ways a repair is priced
Guide example figures. The calculations below use their stated rates. See the current service rates before budgeting.
New glass is priced by area, because the amount of glass changes from one job to the next. A small window pane and a full door leaf take similar work to fit, but very different amounts of glass. It starts at ₹520 per sq ft, matched to the type and thickness you had.
A part is priced per part. A door closer costs the same whether the door is three feet wide or four, and so do hinges, handles, locks and rollers. The part price includes the part, coming to fit it, and setting the door or window afterwards.
A visit is priced as a visit. Some repairs need no new part: a closer needs setting, a sliding door needs raising on its rollers, or a handle needs new washers. Then you pay for the repair visit and nothing else.
Who this page is for
This page is for anyone with a door, a window or a glass fitting that has stopped working properly. That includes a shop door that slams, an office cabin door that will not lock, and a shower door with rusted hinges.
It also covers aluminium and uPVC windows that stick, rattle or leak, doors that let in water or dust, and a loose glass railing or a cracked panel. Often one part has failed and the rest is fine. This page lets you see what that part costs before anyone visits.
What each repair costs
Guide example figures. The calculations below use their stated rates. See the current service rates before budgeting.
On a glass door, a door closer, which is the floor spring, costs from ₹3,900. A heavy-duty one for a busy shop door is ₹5,500. Hinges cost from ₹2,600 a pair, a handle from ₹1,100 and a lock from ₹1,900. A sliding door lock is from ₹1,400, a door seal from ₹950 and a door stopper from ₹650.
On an aluminium window, a handle costs from ₹650, a lock from ₹850 and rollers from ₹950 a pair. On a uPVC window, a handle costs from ₹700 and rollers from ₹1,100 a pair. New glazing rubber costs from ₹850 a window.
New rollers for a sliding door cost from ₹1,800 a door, and for a sliding shower door from ₹1,600 a pair.
For leaks and gaps, window gap sealing costs from ₹1,400 a window and door gap sealing from ₹1,200 a door. A door or window that lets in water costs from ₹1,900 to repair.
A glass railing clamp costs ₹500 each. Broken glass costs from ₹520 per sq ft, and we take the broken glass away.
Each of these is supplied and fitted. GST is extra, and the full table is below.
When it is just the visit
Guide example figures. The calculations below use their stated rates. See the current service rates before budgeting.
Some repairs need no new part. The closer needs setting, the sliding door has dropped on one roller, the handle has a flattened washer, or the lock keeper has moved.
Then you pay for the repair visit. It is ₹1,500 for a window that will not close, a sliding window, or a squeaking glass door. It is ₹1,900 for a sliding track or a stuck door. It is ₹2,300 for setting a glass door, a sliding glass door, an aluminium door or a glass railing, and that visit covers travel and up to two hours of work.
If we find a worn part on the visit, we tell you its price before we fit it. It is added on its own line, and we do not fit a part you do not need.
How long a repair takes
A handle usually takes under an hour. Hinges or rollers take an hour or two. A door closer takes two to three hours, including setting the door afterwards.
The team carries the common chrome parts. Black or brushed finishes and unusual sizes have to be ordered, and we tell you which case yours is when you send a photo.
New toughened glass has to be made to size, because it cannot be cut after toughening. Broken glass can usually be made safe the same day, so you are not left with an open gap while the new panel is made.
What the parts are
We fit floor springs, hinges, handles, locks and rollers from standard ranges sold across India. So a matching part is easy to find when it next needs changing.
We choose the part by the door, not by the price. A shop door gets a heavy-duty closer, and a heavy glass slider gets heavy rollers. A light part on a hard-working door is why some repairs keep coming back.
We fit new rubber gaskets and washers between every fitting and the glass. Reusing the old ones can crack a glass door at the hole.
We give a 2-year warranty on every product we fit, and 6 months on our repair and installation work.
Why come to us for a repair
We will tell you when a job needs setting and not a part, and when it needs a part and not a new door. Many door and window problems are smaller than they look.
We repair doors and windows that we did not fit. Send a photo of the fitting with a tape measure across it, and we bring the matching part.
If a door or a frame is too worn for a repair to last, we tell you before you pay for one.
What happens after you get in touch
Send a photo of the fitting and, for a door or a window, a short video of it moving. That usually shows us the part and the fault, and we can often give you the price before anyone travels.
Repair and installation jobs can also be booked online for a chosen hour.
On the visit we check the whole door or window, not only the part you pointed at. We tell you what we find and the price before we fit anything.
