At your location in just 29 minutesGet the measurements right away.T&C

Glass work by Fabrockers in HSR Layout, Bangalore

Bangalore · offices and homes

Glass & Aluminium Work in HSR Layout

A planned grid, ground floor offices, and flats right above them.

660/ sq ft starting price

Before GST. Firm price after we measure your site. Repairs and replacement glass from ₹520 per sq ft.

  • We handle the building access
  • 1-year fitting warranty
  • Site manager on every job
HSR Layout enquiry

Get prices for this work

Tell us where to reach you - it takes 30 seconds.

Free to ask. Your number stays private.

Sectors 1 to 727th MainAgaraSomasundarapalyaHSR BDA Complex

HSR Layout is the easiest of the southern areas for us to work in. Someone planned it. The roads are wide. The sectors are a grid. A vehicle can stand outside your building without a fight. The buildings are what make it interesting. A small office on the ground floor, with families living above it, changes when we can make noise.

An office under someone's home

This shapes our work here. A ground floor office has flats above it. So the cutting and drilling has to happen at a fair hour.

So we plan the noisy part for the middle of the day. And we do as much prep as we can off site. Toughened glass (safety glass) arrives finished, with the holes and cut-outs already made. Nothing can be drilled into it after it is toughened. That alone removes most of the noise people expect.

If your building has a rule about work hours, tell us on the first call. We will book the day around it.

What a small office actually costs

Most jobs here are two to four cabins. Small rooms cost more per square foot than large ones.

The reason is simple. A door set costs the same in a small cabin as in a large one. Here, much less glass has to carry it. That is simple maths, not a trick. It is also why a quote given only as a rate can mislead you.

There are two honest ways to spend less. A fixed panel with an open doorway drops the door fittings. Those are the biggest single cost on a small room. And ordering all the rooms at once shares one measuring visit, one delivery and one day of our team across all of them.

The bathrooms upstairs

HSR housing splits neatly by age. In the older sectors the buildings have settled, so the walls have moved a little. A slim aluminium frame suits them, because the channel takes that up. The newer blocks in Somasundarapalya and towards Agara are straight. There, frameless is the better looking and the easier answer.

We decide with a level at the measuring visit, not before.

What really stops a leak is not the glass. It is a good seal along the door edge, and bathroom-grade silicone around the joins. Then leave it about a day to set before you use the shower.

What we do in HSR Layout

Each one has its own page for this area, with the local details on it.

How a job runs

  1. Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
  2. We call you backUsually the same day. Where we can, we give you a rough price on the call. Then you know if a visit is worth your time.
  3. We come and measureWe measure the opening. We also check the walls, floor, ceiling and the way in. Your glass is made to these final sizes, so they must be right.
  4. You get a written priceIt shows the glass, the fittings and the fitting work as separate lines. If anything about the job changes, we tell you before we go ahead.
  5. We make it and fit itYou approve the price and pay the advance. Then we make your glass. Our team delivers it, fits it, checks the doors line up and clears the site.

Questions we get from HSR Layout

There are flats above our office. Will the fitting be noisy?

Less than people expect. Toughened glass (safety glass) arrives finished, with every hole and cut-out already made. Nothing can be drilled into it after toughening. So the noisy part is short, and we put it in the middle of the day. If your building has a rule on work hours, tell us on the first call and we will plan around it.

What is the cheapest partition that still looks good?

A fixed frameless panel with an open doorway instead of a door. Every moving part costs money: hinges, a lock, a door closer, a sliding set and its track. On a small room those fittings are most of the price. So if the room works without a closing door, that is where you save.

Styles we fit here

Nearby areas

Get this done in HSR Layout

We measure on site and give you a firm written price before any work starts.

HSR Layout enquiry

Get prices for this work

Tell us where to reach you - it takes 30 seconds.

Free to ask. Your number stays private.

HSR Layout enquiry

Get prices for this work

Tell us where to reach you - it takes 30 seconds.

Free to ask. Your number stays private.