Marine Drive windows take the full force of the monsoon off the sea. Frames pit, handles seize, and the rubber around the glass hardens. Behind them, in Kalbadevi and around Marine Lines station, the repair calls are about shop doors, old wooden windows and mosquito mesh. We repair windows, doors, glass, mesh and mirrors across this part of Mumbai. The parts for sea-facing frames travel in the van.
Windows pitted by Marine Drive spray
A window on Marine Drive faces the sea with nothing in front of it. In the monsoon the spray hits the glass and the frame for days at a time. Aluminium pits, steel rusts, and the rubber beading goes hard and cracks.
When the rubber fails, the glass rattles and water gets in. We replace the beading and the seals first. Then we check the handle and the hinge, which are usually seized with salt. Both can be changed without touching the frame.
A frame that is pitted is not a frame that has failed. We clean and refit. When the metal is thin or the corners have opened, we say so and offer a new window built for the sea. uPVC with stainless steel fittings does well here.
Shop doors and shutters in Kalbadevi
A Kalbadevi shop front is often a glass door inside an old timber or steel frame, behind a rolling shutter. The door is pushed open all day by people carrying goods. The closer wears, the lock drops out of line, and the glass takes knocks.
We adjust or replace the door closer, reset the lock keep, and replace a cracked pane with toughened glass. The lane is too narrow for a van to wait, so we carry parts in by hand.
Shop owners ask us to come before trading starts. We do. A door repair takes a short while once we are there, and the shop opens on time.
Old wooden windows and mesh around Marine Lines station
Many flats near the station still have wooden windows with a wire mesh frame outside. The mesh rusts in the sea air and tears. The wooden frame swells in the monsoon and the shutter jams.
We replace rusted mesh with a stainless steel or fibreglass mesh in a new frame. It does not rust, and it lets more air through than old wire. For a wooden window that jams, we adjust the hinges and the stop. We seal the timber so it takes in less water.
Where a wooden window has rotted at the sill, we offer an aluminium or uPVC window in the same opening. We match the look as close as we can. We tell you honestly which windows are worth keeping.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































