Most repair calls from Sanpada come in two seasons. In the monsoon, rain blows through sliding windows that face the creek. In the dry months, people notice the lock that will not turn and the mosquitoes that come in at dusk. The causes are the weather and the age of the fittings. The fixes are small and done at your flat.
Rain coming through a sliding window in Sanpada
A sliding window leaks when its drain holes are blocked or its seals have shrunk. Rain driven by wind pools in the bottom track and spills inside.
We clear the drain holes first. Then we change the brush seals and the rubber at the meeting edge. On the creek side of Sanpada we also check that the frame still sits tight to the wall.
A window that leaks every monsoon is rarely a glass problem. It is seals and drainage. Both are changed in one visit.
Locks and rollers that seize in the creek air
The air off the creek carries salt. It gets into the window lock and the roller wheels. A lock that was stiff last year will not turn this year.
We replace seized locks with ones made for coastal use. We fit rollers with stainless wheels. Then the window slides with one hand again.
We also check the aluminium frame where salt has pitted it. Pitting is only cosmetic in most cases. Where the track has worn through, we fit a stainless track cover rather than a new window.
Mesh, balcony glass and railings for the Sanpada towers
The towers near the station have large sliding doors onto the balcony. A pleated mesh folds across the opening and lets the breeze in without mosquitoes.
Balcony glass and railing fittings on the higher floors take the wind straight off the creek. We check every clamp and bracket for rust when we fit mesh. A loose glass panel on a high balcony is dangerous.
Where a society allows balcony enclosure, we fit a sliding system in the frame colour the society names. Ask them before you order.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































