A shop door on Gokhale Road works harder than any door in a home. The flats and offices above it have windows that take the full monsoon from the west. We repair both in Naupada, Thane. Most of these jobs are a worn part, not a worn door or window.
Why a shop door closer wears out faster in Naupada
A glass shop door near Thane Station West is opened by every customer, all day. The door closer at the top, or the floor spring under it, takes every one of those swings.
When the closer tires, the door slams or stays open. Dust from the street then gets into the shop. We replace the closer with one rated for heavy use. We also check the pivot and the lock keep, because a door that has dropped a little will not latch.
The glass itself is almost never the problem. We do not quote a new door for a tired closer.
West-facing windows and the Thane rain
Many flats above the shops face west, towards the evening sun and the monsoon wind. Sliding aluminium windows on that side leak first.
The usual cause is the rubber beading. It goes hard in the sun and shrinks, and rain finds the gap. Blocked drain holes in the track are the second cause. Water then pools and runs inside.
We replace the beading, clear and widen the drain holes and fit a new brush seal where the panels meet. The frame stays. A window that leaks is rarely a window that needs replacing.
Rust on hinges and fittings in a humid shop street
Thane's air is humid for most of the year. Plated steel hinges, handles and tower bolts pit and then seize.
A hinge that squeaks and drops the door is the first sign. The door then rubs the floor and the frame. We change the hinges for stainless steel ones, and we reset the door so it swings clear.
For a shop grille door or a wooden back door, we do the same with the bolts and the lock. We oil what can be saved and replace what cannot. You get a list of each part before we start.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































