The units of Wagle Estate carry the aluminium doors and windows they were built with. The sections are heavy and still good. The tracks, rollers, hinges and glass in them are not. We repair those on Road No 16 and across MIDC Thane, at the hours the unit allows.
Saving the old aluminium sections of a Wagle Estate unit
The aluminium used in these units is thicker than most of what is sold today. A frame that has stood this long is usually straight and sound.
What fails is inside it. Sliding tracks wear a groove. Rollers crumble. The rubber holding the glass goes hard. Each of those is a part we replace without touching the frame.
Where a track is worn through, we fit a stainless steel track insert over it. The panel then runs on new metal. It costs far less than new windows across a unit.
Louvre windows and broken panes on a shop floor
Many older units have louvre windows, rows of narrow glass blades that tilt open. The blades crack and the clips that hold them rust.
We replace the broken blades with new glass cut to size, and the rusted clips with new ones. Where the louvre is beyond saving, we fit a sliding aluminium window in the same opening.
For a larger pane broken on the floor, we clear the glass first. Toughened glass goes into any opening at working height. It breaks into small pieces and not shards.
Canteen and office doors that take rough use
The canteen door and the office door of a unit are pushed open with shoulders and trolleys. The closer, the hinges and the handle wear fast.
We fit heavy-duty door closers and stainless steel hinges. The handle is a long pull bar, which takes a push from a hip without bending. The lock is reset so the door latches without a slam.
We work at the hours your unit gives us, often early morning or the weekly off. The parts are carried in, fitted and tested in one visit for most doors.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































