Nerul runs from Palm Beach Road up to the hill, and the repairs change with the slope. The towers on the sea side ring about rusting railing fittings and balcony glass that rattles. The older sectors up the hill ring about sliding windows that drag and locks that have failed. We carry parts for both when we come to Nerul.
Railing fittings on Nerul's sea-facing balconies
A glass railing is held by clamps, a handrail and base brackets. On the Palm Beach side of Nerul these fittings take salt wind every evening.
Plain steel clamps rust and loosen. The glass then moves in the wind. You hear it before you see it.
We replace rusted clamps with stainless ones and re-set the glass. If the handrail has pitted, we polish it or replace the length. A railing on a high floor is checked clamp by clamp. We do not tighten the loose one and leave the rest.
Sliding windows in the older hill-side sectors
The older Nerul sectors have aluminium sliding windows that have run for many years. The rollers have flattened and the track has worn a groove.
New rollers alone do not fix a worn track. The window still drops into the groove and drags. We fit a stainless track cover over the worn track, then new rollers on it.
The window then slides smoothly again without being replaced. The same visit changes the lock and the brush seals, which have usually gone hard by then.
Glass doors for the Nerul market shops
Shops in the Nerul sector markets have glass doors that open hundreds of times a day. The floor spring wears out first, then the pivot.
We replace the spring and set the closing speed. A door that has dropped is lifted back at the pivot so it no longer scrapes.
Broken glass in a shop front is made safe the same day. We remove the broken pane and board the opening. The new toughened pane is cut to size and fitted within days.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































