Seawoods is new, so very little here has worn out with age. What fails is what faces the sea. Balcony clamps rust early. Sliding door rollers fill with salt. Aluminium frames show white pitting on the windward side. The fixes are small, but the parts need to be chosen for the coast, not from the standard list.
Balcony glass and clamps on a sea-facing floor in Seawoods
A balcony glass panel is held by clamps or a channel. On the sea side of a Seawoods tower those fittings take the wind straight off the water.
We check every clamp for rust and movement. A rusted clamp is swapped for a stainless one. The glass is re-set so it no longer rattles.
Where the society allows balcony enclosure, we fit a sliding system in the frame colour the society names. The open track keeps out most rain. A sealed system keeps out more, and costs more. On this coast the sealed one is often worth it.
Sliding door rollers that fill with salt
The big sliding doors onto Seawoods balconies run on rollers in a bottom track. Salt air settles into both. The rollers rust and the door becomes heavy.
We fit rollers with stainless wheels and clean the track. The door slides with one hand again.
Then we show you one habit. Rinse the track with plain water once a month and wipe it dry. On a sea-facing floor that doubles the life of the rollers.
Mesh that lets the sea breeze in
The sea breeze is the reason people live in Seawoods. Mesh lets it in and keeps the mosquitoes out.
On a wide balcony door we fit a pleated mesh that folds to one side. On windows, a sliding mesh in the spare track or a clip-on frame. On the higher floors we use the sturdier mechanism, because the wind pushes hard on a wide mesh.
Mesh frames here are powder-coated aluminium or fibreglass, never plain steel, for the same reason as the clamps.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































