Panchpakhadi sits between LBS Marg and the Thane station approach. The flats and offices here live with road dust and constant traffic. Sliding windows fill with grit and stop gliding. Lobby doors swing all day. We repair the parts that take that wear, in Panchpakhadi and Khopat.
Road dust in a sliding window track
A sliding window on the LBS Marg side collects a layer of grey dust in its track every few weeks. The small rollers under the panel run over that grit and wear flat.
The panel then drops, scrapes, and needs a shove to move. People think the window has warped. It has not. We lift the panel out, clean the track, and fit new rollers of the right height.
We also fit or replace the brush seals at the panel edges. They keep more of the dust out of the track. The window then slides with one finger again.
Door closers in a busy society or office lobby
The glass or aluminium lobby door of a Panchpakhadi tower opens for every resident, visitor and delivery. The closer at the top gives up long before the door does.
A tired closer lets the door bang, or leaves it open so the lobby fills with dust. We fit a closer with a heavier rating and set its two speeds. The door swings shut fast and then slows for the last few inches.
If the door has a floor spring instead, we check the cover plate and the pivot. A floor spring that leaks oil has to be replaced, not adjusted.
Mosquito mesh for flats near the station in Thane
Standing water after the rains means mosquitoes for months, and more in the monsoon. Mesh on the windows is the simplest answer.
For a sliding aluminium window we fit a sliding mesh panel in the outer track. For a window with a grille, a fixed mesh frame sits inside the grille. A balcony door usually takes a pleated or sliding mesh.
Old mesh that has torn is replaced in its own frame. We do not glue new mesh onto an old frame. The frame itself is checked for rust at the corners first.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































