The blocks around Teen Hath Naka and along LBS Marg hold many of Thane's offices. Most partition jobs here are in a floor that is already working. People are at their desks while we fit the glass. That is the fact that decides how we plan it.
Fitting glass cabins around people at their desks
An office near Teen Hath Naka rarely empties for us. So we split the job into a noisy part and a quiet part.
The noisy part is drilling the floor and ceiling for the channels. It takes a few hours. We do it early, or on a weekend, whichever the office prefers.
The quiet part is lifting glass into the channels and sealing it. That can go on during the day. We keep the panels on a trolley along one wall, out of the walkway. Nothing is left standing loose overnight.
The service lift sets the panel size and the day
A commercial block in Panchpakhadi has a lift, but it is shared with everyone on every floor. Many buildings allow goods in the lift only at fixed hours.
We ask the building office for those hours before we fix the date. We measure the lift car on the first visit. The largest panel we make is the largest sheet that lies flat or stands in that car.
Where a glass wall needs a bigger sheet than the lift takes, we make two panels with a slim joint. From a desk away you do not see it.
Quieter meeting rooms beside LBS Marg
LBS Marg carries heavy traffic, and the horns reach every floor that faces it. A meeting room on that side needs more than a single sheet of glass.
We can build the room wall as double glazing. Two sheets of toughened glass with an air gap cut the noise more than one thick sheet would. The door then needs a drop seal at the bottom and a soft seal at the frame.
The cost depends on the size of the room. It is worth it only on the road side. For an inner cabin a single sheet is usually enough.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.




