Thane East is the quieter side of the station. The lanes of Kopri and Chendani hold small shops, clinics and offices in old lowrise buildings. The partition work here is small in size. A glass front for a narrow shop, or a counter inside it. The lanes make the job its own.
A narrow shop front in a Kopri lane
Shops in Kopri are often narrow, with a frontage not much wider than a door. A glass front makes the inside visible from the lane and brings in light.
We fit a fixed toughened panel beside a glass door. The door is usually hinged, because a sliding door would need width the shop does not have. The frame is slim aluminium, which takes little of the opening.
The old wooden front, where there is one, comes out first. We check what is behind it. An old lintel sometimes needs a support before the new frame goes in.
A glass counter for a small clinic or office
Many small offices and clinics near Thane Station East want a counter, not a wall. The glass stands between the desk and the people waiting.
A counter is a low fixed panel, often with a gap for papers to pass. It is toughened glass on a base channel or a short frame. It takes knocks at hip height, so we use a thicker sheet than a tall partition would.
It costs less than a full-height partition because there is less glass. We ask what happens at that counter before we size the gap and the height.
Getting glass down a lane a van cannot enter
Some lanes in Chendani are too narrow for our van. The glass is carried the last stretch by hand.
So the panel size is limited by what two people can carry around a corner. We measure the lane on the first visit as well as the shop. Where a front needs a wide panel, we make it as two panels with a slim joint.
We fit when the shop is shut, early or after closing, so the lane is quiet. The shutter comes down over the new front the same night.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.




