Wagle Estate was built as an industrial estate, and much of it still is. But many of its sheds along Road No 16 now hold offices and back-office floors. A glass partition in a converted shed is a different job from one in a tower. The ceiling is high and the floor was made for machines.
Partitions under a high shed roof in Wagle Estate
A shed roof may be twice the height of an office ceiling. Glass does not go all the way up. It would cost a great deal and it would do nothing.
So we build the partition to a set height, usually a little above head height. A top channel in a slim aluminium frame finishes it. Above it the space is open or closed with a light panel.
Where the shed has a false ceiling, we fix the top channel to that ceiling's frame. We check it can take the weight. A false ceiling that cannot is braced from the roof first.
Cabins on a mezzanine floor
Many units in MIDC Thane have a steel mezzanine. The offices sit upstairs and the floor is a steel deck or thin concrete.
A mezzanine floor flexes a little when people walk. Toughened glass does not flex at all. So we set the base channel on a rubber strip and leave a sealed movement gap at the top. The glass then stays still while the floor moves.
We also check the stair to the mezzanine. It is often steep and narrow. Panel sizes are made to go up it, or the glass is lifted over the edge from the floor below.
Working around a unit that runs in shifts
A working unit in Wagle Estate does not stop for a partition. Most want the noisy work done between shifts, or on the weekly off.
We ask for the shift timings with your enquiry. Drilling the floor and the channels happens in the gap you give us. Lifting the glass and sealing is quiet and can happen while the unit runs.
Dust and sparks are the other concern. Grinding or welding near new glass pits it for good. We fit the glass last, after any hot work in that area is done.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.




