Naupada is where Thane shops. Gokhale Road and Ram Maruti Road are lined with shops, and small offices sit above them. Most of our partition work here is a glass shop front, or a cabin on the floor above a shop. The street itself shapes how we do the job.
Fitting a shop front on Gokhale Road before the crowd arrives
The footpath on Gokhale Road is full from mid-morning until the shops close. A large glass panel cannot be carried through that crowd safely.
So we bring the glass early, before the street fills. The van stops only as long as the unloading takes. The panels go straight inside the shop.
Fitting then carries on behind the shutter, or behind a sheet. You can open on time. The last part is lifting the glass into the frame, and we plan that for a quiet hour too.
Glass at footpath level has to be toughened
A shop front in Naupada stands a hand's width from people walking past. Bags, trolleys and shoulders knock it all day.
We use toughened glass for every front at this level. Toughened glass is heat-treated safety glass. It is several times stronger than plain glass. If it ever breaks, it falls as small blunt pieces and not as sharp shards.
The thickness depends on the panel size and whether it carries a door. A tall display front usually wants a thicker sheet than a small cabin wall. We say which at the measuring visit.
Rain against a front during the Thane monsoon
From June to September rain drives sideways down Ram Maruti Road. Water runs down the glass and collects at the bottom channel.
If that channel has no way out, water sits against the frame and seeps inside the shop. We set the base channel with small drain gaps. We seal the join between the glass and the floor with outdoor-grade silicone.
A sliding glass door in a front gets a brush seal along its edge. It keeps most of the spray out while the shop is open. We check the floor level outside the front too, because a step that slopes inward sends water the wrong way.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.




