The lowrise societies of Kopri and Chendani were built with the aluminium sliding windows and wooden doors of their time. Both are still in daily use. In Thane East we repair them without replacing them. We do it from inside the flat. There is no way to reach the outside of most of these windows.
A worn-through track on an old Kopri window
The sliding windows in these buildings have run on the same track for decades. The rollers have cut a groove into the aluminium. The panel sits in the groove and will not move.
New rollers alone do not fix that. We fit a stainless steel track insert over the worn aluminium. The new rollers then run on smooth metal.
It is done from inside. The panel lifts out of the frame into the room. Nothing is done from a ladder outside, which in these close-built lanes would not be possible anyway.
Louvre and plain glass panes replaced from inside
Many flats near Thane Station East still have louvre windows in the kitchen and bathroom. The narrow glass blades crack and the clips rust.
We cut new blades to size and fit new clips. For a plain sliding window with a cracked pane, we take the panel out, replace the glass and refit the rubber beading.
The neighbour's wall is often an arm's length from the window. So every step happens inside your room. We lay a sheet, work on it and take the old glass away.
Old door locks, bolts and hinges in a Chendani flat
The main doors and bathroom doors in these societies are wooden, with locks and tower bolts that have worn loose.
We fit a new mortice lock into the old door, with a new strike plate on the frame. Loose hinge screws are replaced with longer ones into fresh wood. A door that drags on the floor is lifted on its hinges, not planed.
For a bathroom door that has swollen in the monsoon, we seal the bottom edge against water. That stops the swelling from coming back next year.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































