In the lanes of Mumbra and Kausa the next building is often within arm's reach of your window. Nobody can stand outside to work on it. Along the creek at Diva the mosquitoes come in every evening. We repair windows from inside the room and fit mesh to every opening in this part of Thane.
Every window repair done from inside the room
With no space outside, a sliding window panel has to come out into the room. We lift it off the track and lay it on a sheet on the floor.
New rollers go on. A cracked pane is replaced and the rubber beading refitted. The track is cleaned and a worn one gets a stainless insert. The panel goes back and is tested.
A grille outside the window stays where it is. We work through it or around it. If a grille blocks a panel from lifting out, we unscrew it from inside and refit it.
Mosquito mesh for the creek side at Diva
Flats at Diva and Kausa facing the creek get mosquitoes all year, and many more in the monsoon. Mesh on every window and door is the only full answer.
For a sliding window we fit a mesh panel in the outer track. For a window behind a grille we fit a fixed mesh frame inside the grille. That is also how we fit it when the outside cannot be reached.
We use fibreglass mesh here. It does not rust in the damp creek air and it does not block the breeze.
Sliding door rollers in the Shilphata towers
The new towers along Shilphata have wide sliding glass doors to the balcony. These are heavy and run on small rollers that wear in a few years.
The door drops and scrapes the track. The lock stops meeting its keep. We fit rollers rated for the glass weight, lift the door level and reset the lock.
We clear the drain holes in the sill at the same time. In a tower on open ground the wind pushes rain at the door, and blocked holes let it in.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































