Most windows in the Kopar Khairane sectors are the ones the flats were built with. Aluminium sliders that have run for years. The frames are fine. The rollers, locks, seals and tracks are not. Our work here keeps those windows going with new parts, and adds the mesh and nets the sector flats were never given.
New life for the original sliders in Kopar Khairane
A sliding window that drags has flattened rollers and usually a worn track underneath them. New rollers on a worn track drop into the groove and drag again.
So we fit a stainless track cover first, then new rollers that run on it. The window slides on one finger again.
The lock, the brush seals and the rubber at the meeting edge are changed in the same visit. These are small parts. Together they make an old window feel new without the cost of replacing it.
Mosquito mesh and pigeon nets for the sector flats
The sector flats were built with no mesh. Mosquitoes come in at dusk and pigeons nest in the window ledges and the ducts.
For mesh, we fit a sliding shutter in the spare track of the window. Where there is no spare track, a clip-on frame. Both come off for cleaning.
For pigeons, a net fixed to the outside of the balcony or the duct opening. We fix it to the frame or to the wall with hooks, never to the plaster alone. Then the first strong wind does not take it down.
Monsoon leaks and the frame that has moved
In the monsoon these windows leak at the bottom corner. Rain pools in the track and spills inside.
Usually the drain holes are blocked and the seals have shrunk. We clear the drains and change the seals. That fixes most leaks.
In a few flats the frame has pulled away from the wall over the years. Then we re-seal the frame to the wall from outside with a weatherproof sealant. The window stays. Only the joint is remade.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































