Parel has new towers and old chawls on the same street, and the repairs differ by building. In the towers, sliding windows and balcony doors have settled and need setting. In the chawls and older blocks of Lalbaug and Sewri, wooden and steel windows need hinges, mesh and seals. On the lanes, shop fronts need doors fixed before trading. We repair all of it across this part of Mumbai.
Setting the windows in a new Parel tower
A tower built on redeveloped land settles a little in its first years. The sliding windows and balcony doors fitted at handover then drag, or the lock does not meet its keep. Rain may come in at a corner in the monsoon.
The fix is adjustment, not replacement. We reset the rollers so the sash runs level. We clear the frame's drainage holes, which fill with dust. We change seals that have flattened.
For the rehab flats and the sale flats alike, this is a short visit per window. We can do a whole flat in a morning. The windows then shut tight and the rain stays out.
Keeping old chawl windows working in Lalbaug
The chawls and older buildings of Lalbaug still have wooden windows, and some have steel ones. Both are repairable, and both are often quoted for replacement when a hinge is all that failed.
For a wooden window that jams in the monsoon, we adjust the hinges and seal the timber. We do not plane it while it is swollen. For a steel window we replace the hinge and the stay, remove rust and repaint. The heavy old frame carries on.
Torn or rusted mesh is replaced with stainless steel or fibreglass mesh in a new frame. Near Sewri the dock air rusts wire mesh quickly, so we use the mesh that does not rust.
Shop doors on the lanes toward Elphinstone Road
The shops on the lanes between Lalbaug and Elphinstone Road have glass doors opened all day. The closer wears out. The door slams or stays open, and the lock drops out of line.
We replace the closer or the floor spring with one rated for the door's weight. We reset the lock keep and the patch fittings. A cracked pane is changed for toughened safety glass cut to the opening.
The lanes are narrow, so we carry parts in by hand and come before the shop opens. During the festival weeks in Lalbaug the lanes close to vehicles, and we plan the visit around that. The door is working before trading starts.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































