Byculla has new towers and old buildings side by side, and the repair calls show it. In the towers, sliding windows fitted a few years ago have dropped or started to leak. On the main roads, shop front doors take heavy use. In the old houses of Mazgaon and Agripada, wooden windows and torn mesh need attention. We handle all of it across this part of Mumbai.
Sliding windows in a new Byculla tower that drag or leak
New towers come with aluminium or uPVC sliding windows. After a few monsoons many start to drag, or rain comes in at the corner. Owners think the window is bad. Usually it is the setting.
The rollers were set at the factory and the building has settled a little. We adjust the rollers so the sash runs level and the lock lines up. We clear the drainage holes in the frame, which fill with dust and block. A blocked drain is why the rain comes in.
If the rubber seals have flattened, we replace them. This is a short visit per window, and it is far cheaper than the new window some people are quoted.
Shop front doors on the Byculla and Nagpada main roads
Shops along the main roads have glass doors that are opened all day. The floor spring or the door closer wears out. The door slams, or it does not close, and the air conditioning runs out onto the street.
We replace the closer or the floor spring with one rated for the door's weight. We reset the patch fittings if the door has dropped. A cracked pane is replaced with toughened glass cut to the opening.
We come before the shop opens. The pavement here is too busy for a repair during trading hours, and the shop cannot close. The door is working before the first customer.
Wooden windows and mesh in the old houses of Mazgaon
The older houses of Mazgaon and Agripada often have wooden windows with a wire mesh frame. The wood swells in the monsoon and jams. The mesh rusts near the docks and tears.
We plane only where the frame has moved for good. For a window that jams in the rain and frees up in winter, we adjust the hinges and seal the timber instead. Planing a swollen shutter leaves a gap in the dry months.
We replace rusted mesh with stainless steel or fibreglass mesh in a new frame. It does not rust and it is finer, so it keeps out smaller insects. Where a sill has rotted, we offer an aluminium or uPVC window in the same opening.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































