A flat on Marine Drive faces the open sea with nothing in between. Spray reaches the windows in the monsoon, and the bathroom window is often one of them. A few streets back, around Marine Lines station and Kalbadevi, the buildings are old and the bathrooms are tight. We fit shower glass in both, and we choose the glass, the fittings and the layout for the building you are in.
A shower enclosure in a Marine Drive flat
Many Marine Drive flats have a bathroom window that opens to the sea. Spray and salt come through it in the monsoon. The shower fittings sit in that air all year.
We fit stainless steel hinges, handles and brackets in a grade made for coastal use. We also seal the wall profile with a bathroom-grade silicone that holds in salt and damp. Plated fittings fail fast here.
The bathrooms themselves are often generous. A full cubicle with a hinged door fits well. We set the door to open away from the window wall, so it does not swing into the spray on a wet day.
Thick walls and small rooms off Marine Lines station
The old buildings around the station and into Kalbadevi have thick walls and small bathrooms. The room is often a wet room with one drain, and the shower has no fixed place.
We start by finding where the floor falls. We pour a little water and watch where it runs. The enclosure goes where the water already wants to go. Fighting the fall means water sitting on the wrong side of the glass.
In these rooms a fixed panel or a sliding door usually beats a hinged one. A hinged door needs clear floor to swing. A sliding door runs along the glass and needs none. We measure and tell you which fits.
Fitting glass in a building with one small lift
Buildings here often have a passenger lift that takes a few people and nothing long. A shower panel is tall and goes up the stairs. The stair turns at each floor.
We measure the turn before we cut the glass. Toughened glass cannot be trimmed after it is made. If the stair will not take the panel, we make the side as two panels with a slim joint.
The society usually sets hours for work and for carrying material. We ask for them and we book the carry at a quiet time. The drilling takes a short while, and we do it inside the hours allowed. Sealing and glazing are quiet.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















