Katraj faces the ghats, and the monsoon arrives here with wind behind it. Rain here is often driven sideways into the windows that face the ghat. A seal that has shrunk lets it in. That is the first repair we are called for after the rains begin. The second is the sliding shower door in a society bathroom that has come off its rollers. Both are parts, not glass, and both are done in a visit.
Rain coming past the window seals in Katraj
An aluminium window keeps rain out with rubber. A strip around the glass and a brush seal where the shutters meet. Pune's sun shrinks both over the years. Then a wind-driven rain finds the gap.
We strip the old rubber out and fit new rubber all round the pane. We replace the brush seal between the shutters. We check the drain holes at the bottom of the frame, which fill with dust and stop the frame emptying.
On the ghat-facing side of an Ambegaon society, every window on that face has the same age of rubber. We suggest doing the whole face in one visit, before the next monsoon rather than during it.
A sliding shower door off its rollers in a Katraj society flat
Many Katraj bathrooms have a framed sliding shower enclosure. The door hangs from small rollers on a top rail. When a roller breaks, the door drops at one end and jams, or comes off the rail.
We lift the door out, fit new rollers and clean the rail. The bottom guide, which keeps the door from swinging, is usually worn too, and we replace it at the same time.
The glass panel stays. If the frame has pitted badly and the rollers have gone, we say so, and you can choose between the repair and a new enclosure with the facts in front of you.
Mesh frames rebuilt for Narhe windows
The mesh shutter on a society window in Narhe takes the same sun as the rubber. Its frame goes brittle at the corners and the mesh pulls out of its channel. Pushing it back in holds for a week.
Where the frame is sound, we refit new mesh into it. Where the corners have cracked, we rebuild the frame and fit new mesh. A rebuilt frame runs in the window's own track exactly as the old one did.
For a balcony door, a sliding mesh panel runs beside the glass. The whole flat is one visit. Ask us to check every window while we are there, because they all went in on the same day and age together.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































