The aluminium windows in Aundh's societies have opened and closed through many Pune summers. Their handles have worn smooth and their locks no longer bite. A pane breaks now and then from a cricket ball in the society ground. On DP Road, the shop doors take a different kind of wear, and the lock that must work at ten every night is the part that fails. We carry the parts for all of these.
Aluminium window handles and locks in an Aundh society flat
An aluminium sliding window locks with a small latch on the shutter. When the latch wears, it will not hold. People tie the window shut or wedge it with a stick.
We fit a new latch of the same pattern. If the shutter has dropped so the latch misses, we lift the shutter first. A new latch on a dropped shutter fails the same way within a month.
On a window with a handle that has come off, the thread in the frame is usually stripped. We fit a new handle with a through-bolt rather than a screw into the same stripped hole. It is a small difference and it is what makes the repair last.
A broken window pane replaced in Bopodi or Sanewadi
A window pane breaks from a knock. In a society with a ground, it is often a ball. The glass is held in the aluminium frame by a rubber strip, and the broken piece has to come out carefully.
We remove the broken glass, clean the frame and fit a new pane with new rubber. The old rubber has shrunk in the sun and would not grip a new pane. New rubber all round is part of the job, not an extra.
Where the window is on a lower floor and faces the ground, we suggest toughened glass for the new pane. The next ball bounces off it.
DP Road shop doors that must lock at closing time
A shop on DP Road locks a glass or aluminium door every night. When the door has dropped, the lock misses its keep and the shutter does not feel secure.
We set the door back to its height first. On a glass door that means the floor spring or the patch fittings. On an aluminium door it means the hinges or the rollers. Then we check the lock. Usually it is fine once the door sits right.
Where the lock itself has worn, we fit a new one with the same key pattern where we can. We come after closing or before opening, so the shop loses no trade.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































