Aundh's societies have been lived in for a long time, and so have their bathrooms. The shower enclosure we replace here is usually a framed one whose aluminium has pitted and whose rollers have gone. In Sanewadi and Bopodi the older flats often have a half wall at the shower, with a curtain above it. Both call for a new enclosure that suits the bathroom it goes into, rather than one that suits a brochure.
Taking out a pitted framed enclosure in an Aundh society
The old enclosure comes out first. The frame is unscrewed from the wall, the silicone is cut and the panels are lifted away. Where the frame was, the tiles usually carry a line of old silicone and a few screw holes.
We clean that line back to the tile. The holes are filled. If the new enclosure is a different shape, the old line may show on the tile. We tell you that before we start, and we place the new glass to cover it where we can.
The old frame and glass leave with us the same day. Nothing waits in the society's parking for the committee to notice.
Glass on top of a half wall in a Sanewadi bathroom
Many older flats around Sanewadi and Bopodi have a low wall at the shower, about waist high, with a curtain hung above it. The curtain drips, sticks to you and never dries.
A fixed glass panel on top of that wall replaces the curtain. It sits in a slim channel on the wall's top edge and rises to head height. The half wall stays, so there is no tiling work.
The top of the wall must be level for the channel. Old walls rarely are. We check with a level and pack the channel so the glass stands true. From the room it reads as one clean line.
Low ceilings and the height of the shower glass
The ceilings in older Aundh societies are lower than in a new tower. A standard-height enclosure can come close to the ceiling, which traps steam inside and leaves the glass dripping.
So we size the glass for the room. We leave a gap at the top for the steam to clear. The glass still stops the splash, because splash happens low and steam rises.
Where a geyser hangs on the shower wall, we keep the glass clear of it. The geyser needs room for its pipes and its service. We mark its position on the measuring visit so the glass is cut around it.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















