The towers along Pashan-Sus Road have bathrooms with the shower in a corner. Two tiled walls, and the glass closes the other two sides. That is a corner enclosure, and it is the shape we fit most often in Pashan and Sus. It looks simple. It depends on two walls being square to each other, and on a door that opens where the bathroom has room. We check both before we quote.
Why a corner enclosure in a Pashan tower needs square walls
A corner enclosure has a fixed panel on one side and a door on the other. They meet at a right angle away from the walls. If the two tiled walls are not square to each other, that corner is out too, and the door does not meet the panel cleanly.
We measure both walls and the angle between them at the visit. A small error is taken up in the fittings. A larger one means we adjust the panel widths so the corner lands true.
The door usually goes on the side facing the basin, so you step out towards the towel. We check that it does not hit the basin or the WC when it opens.
Steam and the small vent in a Sus bathroom
Tower bathrooms in Sus often have a small vent or exhaust fan high on one wall, and no window. Steam from the shower has nowhere to go but that vent.
An enclosure that reaches the ceiling traps the steam inside it. The glass drips and the bathroom stays damp. So we stop the glass well short of the ceiling. The steam rises over the top and the fan clears it.
We also leave the door seal slightly open at the top on purpose. It is a small detail that keeps the air moving and the glass drying between showers.
Cooler air on the Panchavati slope and glass that mists
The Panchavati side of Pashan sits on a slope and its mornings are cooler than the city below. Cold glass and a hot shower mean mist. The glass clouds over in the first minute.
Mist is not a fault, but it is a nuisance on a frameless panel that is meant to look clear. A protective coating makes the mist run off faster. Opening the vent before the shower helps more.
In the older lowrise societies of Pashan, the bathroom usually has a window. There we suggest the enclosure sits away from the window wall, so the window can open and the mist clears on its own.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















