Sinhagad Road is a long line of tower societies, from Anand Nagar out through Vadgaon Budruk to Dhayari. The flats in them are built to a few repeated plans. So the bathrooms repeat too. Once we have fitted one shower enclosure in a tower, we know the shape of every bathroom like it. That is why neighbours on Sinhagad Road often book together, and why it costs them less when they do.
The long narrow bathroom of a Sinhagad Road tower flat
The common bathroom plan in these towers is long and narrow. The shower is at the far end, the full width of the room. The door to the bathroom is at the near end.
For that shape, the enclosure is a single straight line across the room. A fixed panel on one side and a door on the other. Or a single fixed panel, with the gap beside it as the way in.
The width is set by the walls, so the only choices are the door type and the height. A sliding door usually suits a narrow room. It takes no floor space when it opens, and the basin can sit right beside it.
Fitting three flats in one Dhayari tower on one day
When neighbours in the same tower book together, we fit them on the same day. The glass for all the flats arrives in one trip. The team moves from floor to floor without leaving the building.
Each flat still gets its own measuring. The plans repeat but the tiling does not, and a few millimetres matter for toughened glass. We measure every bathroom, then order the glass as one lot.
The saving is in the travel and the setting-up. Three flats on one day cost each owner less than three visits on three days. Ask in your society group. There is usually somebody else waiting to do theirs.
Road dust and the glass that faces the window
Sinhagad Road is a busy road, and its dust is fine and constant through the dry months. A bathroom window that faces the road lets it in. The dust lands on the shower glass and sticks to the wet surface.
We suggest a protective coating on the glass for the road-facing flats. Dust and water run off together rather than drying into a film. A wipe with a damp cloth brings the glass back.
For the hinges and the handle, we use fittings with a sealed finish. Dust in an unsealed hinge grinds it over time. A sealed one keeps turning smoothly through the summers.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















