Window Gap Sealing across Pune
When a new aluminium or uPVC window goes into an old opening, the window itself seals well. The joint around its frame often does not. In the old societies and wadas of Sadashiv Peth, Shivajinagar and Swargate, that joint was packed with mortar that has since crumbled. The gap runs right round the frame, behind any mesh. Mosquitoes find it after the monsoon, and the winter dust finds it every evening.
Window gap sealing closes that joint for good. We dig out the crumbled mortar and any old sealant, because new sealant holds only on a clean surface. A deep gap is packed with foam cord first, so the sealant has something to sit on. The outside face is sealed against weather and the inside face against dust and noise.
Every window in a flat was usually filled the same way, so we check them all on one visit. The price is written before we start.
Is this the right service for your job?
Choose this for open joints between the fixed window frame and the wall.
- If the gap is around the moving shutter, see the Window Seal Replacement. A closing strip seals that joint while letting the window open.
- If rain gets in but you cannot find the entry point, see the Window Water Leakage Repair. It traces the leak before deciding where sealing is needed.
What window gap sealing covers
Between every window frame and the wall it sits in, there is a joint, and in many buildings that joint was filled once with mortar or cheap sealant and never again. It cracks, crumbles and opens, leaving a running slot around the window. Fine dust drifts through it daily, ants and mosquitoes use it as a road, traffic noise rides through it, and in a storm it whistles. Book a visit online for the hour that suits you, or call or WhatsApp us. We check the joint, confirm the price, and seal the full perimeter, inside and out. It starts at ₹1,400 per window.
How a Pune visit goes
- Tell us about the job. Send a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutes. We confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measure. We measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written price. It lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit it. You approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.
Specifications, materials and the common questions about window gap sealing
