At your location in just 29 minutesGet the measurements right away.T&C

Illustration: Daylight showing through unsealed gaps around a window AC and its side panel

Windows · Bengaluru, Delhi NCR, Mumbai MMR and Pune

Gap Around Window AC? Solutions & Cost

A window AC rarely fills the whole opening, and what fills the rest decides what gets in.

₹1,260/ window starting price₹1,40010% off

The starting price for Window Gap Sealing, the commonest fix. One fixed price per window, supplied and fitted.

  • Verified on-site measurement
  • 2-year product warranty, 6 months on the work
  • Fitted by our own team. We never subcontract.
Also searched as

The short answer

A window AC is usually narrower than the window it sits in. The space beside it is filled with plywood or thermocol. That packing shrinks and rots, and lets in rain, dust and hot air. The lasting fix is a glass panel cut to the opening beside the unit. The thin gaps are sealed, and mesh goes where insects get in. The AC stays removable, so a technician can still take it out for service.

The useful distinction

Measure the opening, not the gap, before choosing the filling

A packing that has rotted or shrunk is a sizing problem, not a sealing problem. Thin gaps round a firm panel need only a seal and a weather strip. Insects and lizards use the side gaps, so mesh goes there as well.

Why it happens

Usually one of these 4 things, commonest first. Each one says how to tell, and what we do about it.

  1. The packing beside the unit has rotted or shrunk

    How to tell
    The plywood is soft, swollen or dark with damp. Thermocol has crumbled, and light shows around its edges. Dust blows in on windy days even with the AC off.
    What we do
    We measure the opening beside and above the unit. A glass panel is cut to that size and fixed in the frame with a beading and a seal. It keeps the daylight the plywood blocked, and it does not rot.
    Mirror & Custom Glass InstallationFrom ₹416 / sq ftSee this fix
  2. Rain gets in through the thin gaps round the unit

    How to tell
    Water runs down the wall under the AC during heavy rain. The wall paint there is stained or peeling. The gap is narrow, a finger's width or less, all round the unit.
    What we do
    We pack the gap with foam backer, a soft cord, and seal over it with a weatherproof silicone. The seal sits against the AC casing, not the working parts, so the unit still slides out.
    Window Gap SealingFrom ₹1,260 / windowSee this fix
  3. Hot air and dust leak in, and the room never cools

    How to tell
    You feel warm air at the edges of the AC when you hold a hand there. The AC runs for hours and the room stays warm. Dust lines form on the sill under the unit.
    What we do
    We fit weather strip, a soft sealing strip, around the casing and along the panel edges. The frame joint is sealed where air leaks through it. The AC then cools the room instead of the outside.
    Window Air Leakage RepairFrom ₹1,350 / windowSee this fix
  4. Insects and lizards come in through the side gaps

    How to tell
    Mosquitoes and lizards appear in that room more than in others. The gaps beside the unit are open, or covered only with loose cloth or tape.
    What we do
    A mesh panel goes into the opening beside the unit, in a slim aluminium frame. Stainless steel mesh keeps insects out and lets air through where you want it. It is cut to the same opening as the glass panel, so the two sit side by side.
    Window Mosquito Net & MeshFrom ₹162 / sq ftSee this fix

What you can check first

These checks are safe to do yourself. A photo or a short video of what you find helps us come prepared.

  • Hold your hand around the edges of the AC on a hot afternoon and feel for warm air.
  • Press the plywood or thermocol beside the unit and see whether it is soft or loose.
  • Look at the wall under the AC for water stains after rain.
  • Measure the width and height of the whole window opening, and of the AC casing.
  • Take a photo of the AC from inside the room, showing the whole window.

Do not push on the AC casing or lean out of the window to look at the gap from outside. The unit is heavy, and old packing may be all that holds its outer edge.

What it costs

Every fix on this page, with its starting price before GST. We find which one you need, and you get a fixed price before any work starts.

FixStarting priceHow it is pricedLink
Window Gap Sealing₹1,260/ window₹1,40010% offOne fixed price per window, supplied and fitted.See this fix
Mirror & Custom Glass Installation₹416/ sq ft₹52020% offYou pay this rate for the square feet we measure on site.See this fix
Window Air Leakage Repair₹1,350/ window₹1,50010% offOne fixed price per window, supplied and fitted.See this fix
Window Mosquito Net & Mesh₹162/ sq ft₹19015% offYou pay this rate for the square feet we measure on site.See this fix

Not sure which one it is? Send a photo or a short video. We will tell you what it looks like, usually within minutes, before anyone comes out.

Common questions

What is the best way to fill the gap between an AC and the window frame?

A glass panel cut to the opening is the most lasting way. It lets daylight in, it does not rot, and it wipes clean. Plywood and thermocol are cheap, but they shrink and rot within a few seasons. The thin gaps that remain are sealed with foam and silicone, not tape.

Can the AC still be taken out for servicing after the gap is closed?

Yes. The glass or mesh panel fills only the space beside and above the unit. The seal round the casing is cut and renewed when the unit comes out. We do not seal the AC into the frame, and we do not service the AC itself.

Why does water drip inside from my window AC when it rains?

Usually the rain is coming through the gap round the unit, not through the AC. The packing beside it soaks up water and drips. If the AC itself leaks while it runs, its drain slope is wrong, and that is the AC technician's job.

Does closing the gap around the AC help the room cool faster?

Yes, often a lot. Hot outside air leaks in through every open gap while the AC pushes cool air out through them. Sealing the edges and filling the opening keeps the cool air in the room. The AC then runs less for the same cooling.

Related problems

Other problems with the same kind of door, window or fitting, and where to go next.

Get this done at your place

We come to you anywhere in Bengaluru, Delhi NCR, Mumbai MMR and Pune. We find the cause, and give you a fixed price before any work starts.

  • Toughened safety glass, at the thickness stated in your written quote.
  • The fittings, finish and supplied parts are named before you approve the job.
  • We source the glass and fittings against the specification in your written quote.
  • We check the quality before we leave. Most jobs are done in 3 to 4 days.
  • No hidden fees. GST is shown as its own line on the quote.
  • Your details stay protected and confidential on a secure connection.
  • You get dedicated support after fitting, from the same team every time. They are dependable.
  • Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.
Chat on WhatsApp