At your location in just 29 minutesGet the measurements right away.T&C

Illustration: Bent and disconnected friction stay beneath an open uPVC casement window

Windows · Bengaluru, Delhi NCR, Mumbai MMR and Pune

Window Won't Stay Open? Causes & Repair Cost

An openable window that swings shut on its own has a worn stay, a loose screw or a tired handle.

₹1,350 starting price₹1,50010% off

The starting price for Aluminium Window Repair, the commonest fix. One visit covers travel and the work to fix the fault. Any parts are priced on their own line.

  • Verified on-site measurement
  • 2-year product warranty, 6 months on the work
  • Fitted by our own team. We never subcontract.
Also searched as

The short answer

A window that will not stay open has usually worn its friction stay. The stay is the folding steel arm at the top and bottom of the window. It holds the sash, the moving part, at any angle. A stay screw pulled out of the frame, or a handle that no longer latches, are the other common causes. We fit new stays or a new handle, and the window holds again at the angle you leave it.

The useful distinction

A window that drops shut has lost its hold, not its hinge

An openable window stays put through a friction stay or a holding latch. If the sash drifts slowly, the stay has worn and lost its grip. If it drops at once, a screw has pulled out of the frame.

Why it happens

Usually one of these 4 things, commonest first. Each one says how to tell, and what we do about it.

  1. The friction stay has worn smooth

    How to tell
    The window opens easily, then drifts closed or swings wide in a breeze. The arm at the top looks sound, but it no longer holds. On a top-hung window, the sash slowly drops shut.
    What we do
    We fit a new pair of stays of the same length and type. Stainless steel stays suit our climate and do not seize. We set the friction so the sash holds at any angle but still opens by hand.
    Aluminium Window RepairFrom ₹1,350See this fix
  2. A stay screw has pulled out of the frame

    How to tell
    The window dropped suddenly one day rather than wearing slowly. One end of the arm moves in its fixing, or a screw hole is enlarged. The same loose stay makes the window sit crooked when closed.
    What we do
    We refix the stay with the right screws, or with rivet nuts where the hole is worn. Then we set the sash square so it closes and locks properly. One visit covers the hold and the closing both.
    Window Not Closing RepairFrom ₹1,350See this fix
  3. A uPVC handle no longer latches the sash

    How to tell
    The handle turns, but the sash does not lock in the open or closed position. It feels loose, or spins past where it used to stop. The window blows open or will not stay on the latch.
    What we do
    We fit a new handle with the right spindle, the square pin that drives the lock. Where the window has a night latch for a small opening, we set that too.
    uPVC Window Handle ReplacementFrom ₹595 / handleSee this fix
  4. An aluminium handle has lost its catch

    How to tell
    The handle on an aluminium casement no longer holds the sash closed, so it swings open. The catch, or the keeper it hooks into, is worn or missing.
    What we do
    We fit a new handle and set its keeper so it catches on the first try. A new stay often goes on at the same time, since both wear together.
    Aluminium Window Handle ReplacementFrom ₹553 / handleSee this fix

What you can check first

These checks are safe to do yourself. A photo or a short video of what you find helps us come prepared.

  • Open the window halfway, let go, and watch whether it drifts or drops.
  • Look at the folding arm at the top of the window for loose screws or a bent link.
  • Try the handle and notice whether it holds the sash in any position.
  • Check whether the window swings or slides, because this page is about swinging windows.
  • Film the window being opened and released, so we can see how it moves.

Do not prop an upper-floor window open with a stick or a bottle. If the stay has failed, the sash can swing out and pull on its hinges. Keep it closed until the stays are changed.

What the repair costs

Every fix on this page, with its starting price before GST. We find which one you need, and you get a fixed price before any work starts.

FixStarting priceHow it is pricedLink
Aluminium Window Repair₹1,350₹1,50010% offOne visit covers travel and the work to fix the fault. Any parts are priced on their own line.See this fix
uPVC Window Handle Replacement₹595/ handle₹70015% offOne fixed price per handle, supplied and fitted.See this fix
Aluminium Window Handle Replacement₹553/ handle₹65015% offOne fixed price per handle, supplied and fitted.See this fix
Window Not Closing Repair₹1,350₹1,50010% offOne visit covers travel and the work to fix the fault. Any parts are priced on their own line.See this fix

Not sure which one it is? Send a photo or a short video. We will tell you what it looks like, usually within minutes, before anyone comes out.

Common questions

Why won't my window stay open any more?

The friction stay has usually worn. It is a folding arm with a sliding block that grips the track as the window opens. Years of opening polish that block until it slides freely. New stays bring the grip back, and the window holds where you leave it.

Can a friction stay be tightened instead of replaced?

Some stays have a small screw that sets the friction, and we try it first. Most of the stays fitted on homes here have no adjustment. Once the sliding block has worn, tightening does nothing for long. A new stay is the honest fix in that case.

Is a window that will not open the same problem?

No. A window that will not open usually has a jammed handle, a stuck lock or grit in the track. That fault has its own page. This page is about a window that opens, then does not hold.

Do top-hung windows need different stays from side-hung ones?

Yes. A top-hung window hangs its sash from the top and needs stays that carry its weight. A side-hung window swings like a door and needs stays with more friction. We bring the type that suits your window after seeing a photo.

Related problems

Other problems with the same kind of door, window or fitting, and where to go next.

Get it fixed at your place

We come to you anywhere in Bengaluru, Delhi NCR, Mumbai MMR and Pune. We find the cause, and give you a fixed price before any work starts.

  • Toughened safety glass, at the thickness stated in your written quote.
  • The fittings, finish and supplied parts are named before you approve the job.
  • We source the glass and fittings against the specification in your written quote.
  • We check the quality before we leave. Most jobs are done in 3 to 4 days.
  • No hidden fees. GST is shown as its own line on the quote.
  • Your details stay protected and confidential on a secure connection.
  • You get dedicated support after fitting, from the same team every time. They are dependable.
  • Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.
Chat on WhatsApp