At your location in just 29 minutesGet the measurements right away.T&C

Illustration: Failed sealant leaving a gap between an aluminium window frame and plaster wall

Windows · Bengaluru, Delhi NCR, Mumbai MMR and Pune

Gap Between Window Frame and Wall? Causes & Repair Cost

The joint between a window frame and the wall opens slowly, and rain, dust and ants find it first.

₹1,260/ window starting price₹1,40010% off

The starting price for Window Gap Sealing, the commonest fix. One fixed price per window, supplied and fitted.

  • Verified on-site measurement
  • 2-year product warranty, 6 months on the work
  • Fitted by our own team. We never subcontract.
Also searched as

The short answer

A gap between the window frame and the wall usually means the sealant has cracked. Sun and heat make the frame move a little every day, and old sealant cannot follow it. Plaster that shrank back from the frame is the next common cause. We cut out the old filling, pack the gap and seal it on both faces. The small drain slots at the bottom of the frame are left open, because they let water out.

The useful distinction

Decide whether the joint or the frame itself has moved

A crack along a firm, still frame points to the sealant or the plaster. A frame that shifts when you press it points to its fixing screws. Water on a flat sill means the sill, not the joint, comes first.

Why it happens

Usually one of these 5 things, commonest first. Each one says how to tell, and what we do about it.

  1. The sealant around the frame has cracked and pulled away

    How to tell
    You see a thin dark line or a crumbling bead along the edge of the frame. Fine dust settles on the sill below that edge. In rain, a damp patch grows on the wall beside the frame.
    What we do
    We cut the old bead out down to clean metal and plaster. A deep gap is packed with backer rod, a soft foam cord, before sealing. Then we run a weatherproof silicone or polyurethane sealant along the joint, outside and inside.
    Window Gap SealingFrom ₹1,260 / windowSee this fix
  2. The plaster has shrunk back from the frame

    How to tell
    The gap is wider than a sealant bead, and the plaster edge is rough or loose. Pieces of plaster may have fallen onto the sill. The frame itself feels solid when you press it.
    What we do
    A narrow shrink line is packed and sealed in the same visit. A wide, crumbling plaster edge needs a mason to make it good first, and that is not our work. Once the edge is sound, we seal the joint so it stays closed.
    Window Gap SealingFrom ₹1,260 / windowSee this fix
  3. The sill slopes inward, so rain runs into the joint

    How to tell
    Water stands on the outside ledge after rain instead of running off. The leak shows at the bottom corners of the frame, not along the sides. There is no drip edge under the ledge to throw water clear.
    What we do
    We test the sill with water to see where it runs. Then we seal the joint under the frame and shape the sealant to shed water outward. If the ledge itself needs re-laying, that is a mason's job and we tell you so.
    Window Water Leakage RepairFrom ₹1,710 / windowSee this fix
  4. An aluminium frame moves because it has too few fixings

    How to tell
    Press the frame near a corner and it shifts or clicks against the wall. The sealed joint cracks again a few months after it was filled. The window may rattle in strong wind.
    What we do
    We add fixing screws through the frame into the wall where they are missing. Packing pieces behind the frame take out the movement. Only then do we seal the joint, so the new sealant is not torn open.
    Aluminium Window RepairFrom ₹1,350See this fix
  5. A uPVC frame has bowed or its screws have loosened

    How to tell
    The gap is wider in the middle of one side than at the corners. The shutter may have become hard to lock on that side. Hot afternoons make it worse, and cool mornings make it better.
    What we do
    We check the steel inside the frame and tighten or add the fixing screws. A bowed frame is pulled straight against the wall with packers. Then the joint is sealed and the shutter adjusted to lock easily again.
    uPVC Window RepairFrom ₹1,350See this fix

What you can check first

These checks are safe to do yourself. A photo or a short video of what you find helps us come prepared.

  • Press the frame gently near each corner and notice whether it moves against the wall.
  • Look along the joint in daylight for a dark line, a crack or missing plaster.
  • After rain, check whether water stands on the outside ledge or runs off it.
  • Find the small drain slots at the bottom of the frame and see that they are clear.
  • Photograph the joint from inside, and from outside only if you can do so safely.

Do not lean out of an upper-floor window to fill the outside joint. A fall from a window is the real risk here, not the gap. We seal the outside face from inside, or with proper access.

What the repair costs

Every fix on this page, with its starting price before GST. We find which one you need, and you get a fixed price before any work starts.

FixStarting priceHow it is pricedLink
Window Gap Sealing₹1,260/ window₹1,40010% offOne fixed price per window, supplied and fitted.See this fix
Window Water Leakage Repair₹1,710/ window₹1,90010% offOne fixed price per window, supplied and fitted.See this fix
Aluminium Window Repair₹1,350₹1,50010% offOne visit covers travel and the work to fix the fault. Any parts are priced on their own line.See this fix
uPVC Window Repair₹1,350₹1,50010% offOne visit covers travel and the work to fix the fault. Any parts are priced on their own line.See this fix

Not sure which one it is? Send a photo or a short video. We will tell you what it looks like, usually within minutes, before anyone comes out.

Common questions

How do you fill a gap between a window frame and the wall so it lasts?

The old filling has to come out first, or the new sealant peels with it. A deep gap gets a foam cord so the sealant is not too thick. Then a flexible, weatherproof sealant goes on both faces of the joint. Hard cement filling cracks again within a season, because the frame moves and cement does not.

Should the small slots at the bottom of my window frame be sealed too?

No. Those slots are weep holes, which drain rain out of the frame track. Sealing them traps water inside the frame and sends it into the room. We seal the joint around the frame and leave every weep hole open.

When is the best time to seal window gaps before the monsoon?

In the dry weeks before the rains, usually April and May in both cities. The joint must be dry when the sealant goes on, or it will not stick. A joint sealed during the rains often fails in the same season.

Why did the gap around my window come back after it was filled last year?

Usually because the frame moves and the filling could not stretch with it. Cement, putty and cheap sealant all crack along the frame edge. A frame with loose fixings tears any sealant open. We fix the movement first, then seal with a sealant made to stretch.

Related problems

Other problems with the same kind of door, window or fitting, and where to go next.

Get it fixed at your place

We come to you anywhere in Bengaluru, Delhi NCR, Mumbai MMR and Pune. We find the cause, and give you a fixed price before any work starts.

  • Toughened safety glass, at the thickness stated in your written quote.
  • The fittings, finish and supplied parts are named before you approve the job.
  • We source the glass and fittings against the specification in your written quote.
  • We check the quality before we leave. Most jobs are done in 3 to 4 days.
  • No hidden fees. GST is shown as its own line on the quote.
  • Your details stay protected and confidential on a secure connection.
  • You get dedicated support after fitting, from the same team every time. They are dependable.
  • Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.
Chat on WhatsApp