Wakad's towers are tall, and the wind at the top floors is stronger than the lanes below suggest. It tears mesh shutters and slams sliding windows. Inside the flats, the glass dining top that came with the furniture cracks, and the uPVC sliding windows the builder fitted start to drag. These are the three calls we get most from Wakad, Kaspate Vasti and the societies along Hinjewadi Road. Each is a short visit.
A dining table glass top replaced in a Wakad flat
The glass top on a dining table cracks from a hot dish set down on a cold surface, or from a knock while moving. The table is fine. The top is a sheet of glass and we make a new one.
We measure the old top or the table frame, and cut toughened glass to the same shape. Toughened glass takes heat and knocks far better than the plain glass most tables come with. The edges are polished and the corners rounded.
Round, oval and rectangular tops are all made the same way. We bring the new top and take the broken one away. It is one visit, and the table is back in use the same day.
Mesh shutters torn by the wind on a high floor
On the upper floors of a Wakad tower the wind catches a mesh shutter and tears the mesh from its channel. Or it bends the light frame so the shutter jams.
We refit new mesh into a sound frame, with a thicker mesh and a deeper channel grip than the builder used. A bent frame is straightened or replaced. The shutter runs in the window's own track as before.
On a window that faces the wind directly, we fit a small catch that holds the mesh shutter closed. A shutter that is free to rattle in a gust tears again.
uPVC sliding windows that drag in a Kaspate Vasti flat
The uPVC sliding windows in Wakad's towers run on small rollers under each sash. The builder's rollers were light, and after a year or two of dust they wear and the sash drops.
The sash then drags along the track and the lock misses. We fit heavier rollers, clean the track and set the sash back to its height. The lock lines up again on its own.
A uPVC frame is softer than aluminium, so a sash that has dragged for months can wear a groove in the track. We check for that and fit a track cover where it has happened. The window then runs on a fresh surface.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































