A house in the Pradhikaran sectors of Nigdi was built to its owner's drawing. Its windows are not the sizes a tower uses. Its terrace has a railing the owner chose, often glass. Its front door has a glass panel the owner picked. When any of these needs a repair, there is no standard part to reach for. We measure, and we make the part to the house. That is what repair work in Nigdi and Akurdi mostly is.
Terrace glass railings on a Pradhikaran house
Many of the houses in the Pradhikaran sectors have a terrace with a glass railing along its edge. It was fitted when the floor was built, and the clamps have been in the sun and the rain since.
We check every clamp and post. The ones that have loosened are tightened. The ones whose bolts have rusted are replaced with stainless ones. A panel that has chipped at the edge is replaced, because a chip in toughened glass is where it will eventually break.
A terrace railing is where children lean and where the family sits in the evening. It should not move when pushed. We leave it that way.
Made-to-measure mesh for odd-sized Nigdi windows
The windows in an owner-built house follow the owner's drawing, not a standard. A mesh shutter from a shop does not fit them. So the windows in many Pradhikaran and Yamuna Nagar houses have never had mesh at all.
We measure each window and make a mesh frame to fit it. Where the window has a spare track, the mesh shutter slides in it. Where it does not, a frame clips over the opening and lifts off for cleaning.
Every window in the house is a different size, so we measure them all on one visit and make them all together. The whole house is done in a day.
Glass renewed in the front door of an Akurdi house
Front doors in Nigdi and Akurdi often carry glass. A frosted panel, a strip of coloured glass, or an etched design the owner chose. It cracks, and it is the first thing a visitor sees.
We measure the panel and have new glass made in the same finish. Where the original was plain, we make it toughened so it does not crack again. An etched pattern is matched as closely as the original allows.
Until the new glass is ready, the crack is taped and covered so the door is safe to use. The new panel goes in on a second visit, and the door looks as it did when the house was finished.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































