A new flat in Ravet comes with new windows, and the first repairs are not wear. They are the things the builder fitted to a price. Mesh so light it tears in the first wind. Glass scratched by a grinder during the finishing. Handles tightened once and never again. We see the same three in every tower in Ravet, Punawale and Tathawade, and we fix them in one visit before they become bigger problems.
Replacing the builder's mesh in a Ravet tower flat
The mesh shutters a builder fits in Ravet are light. Thin mesh, a thin frame, and plastic guides that wear in months. The mesh sags, tears at a corner and the mosquitoes find the gap.
We replace the mesh with a thicker grade in a frame that grips it properly. Where the frame itself is too light, we make a new one that runs in the same track.
The balcony door gets a sliding mesh panel of the same quality. A whole flat is one visit. Done before the monsoon, it is the difference between a quiet night and a sleepless one.
Glass scratched during the finishing in Punawale
A new flat in Punawale was finished by many trades, and the glass was in place while they worked. A grinder throws sparks that pit glass. A trowel scratches it. Paint dries on it.
Paint and cement come off with a blade and the right cleaner. Scratches and pits do not. If a pane is badly scratched, the only fix is a new pane.
We look at each pane with you and say which can be cleaned and which cannot. Then we clean the ones we can and make new glass for the rest. Do this before you move in, when the flat is still empty and the glass is easy to reach.
Handles and locks that were never set in a Tathawade flat
The handles on new uPVC and aluminium windows in Tathawade were fitted by the hundred. Each was screwed on once. In the first months they loosen, spin or stop turning the lock fully.
We go through the flat and set each one. A loose handle is fixed with its proper screw and a thread locker. A lock that does not engage is aligned to its keep. A handle that has cracked is replaced with a heavier one.
It is an hour or two for a whole flat. It is the visit that stops you calling three separate times over the next year.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































