Repair work in the peths is work on old things. A wada window with a cracked pane in a wooden frame. A society window whose aluminium shutter has dropped. A Laxmi Road shop door that will not shut behind its shutter at night. We walk the parts in through the lane and fix what is there.
Wooden windows in the wadas of Sadashiv Peth
A wada window has a wooden frame and small panes held by beads. When a pane cracks, we cut a new one to the opening and reset the bead.
The wood swells in the monsoon and the window sticks. We ease the shutter, reset the hinges and wax the edge. In the dry months it then closes without a push.
A mesh for a wada window is a separate frame fixed inside the opening. The old frame is left as it is.
Society windows in Narayan Peth and Shaniwar Peth
The societies have aluminium sliding windows that have run for years. The rollers wear and the shutter drags. We change the rollers and clean the track.
The rubber around the glass hardens and shrinks. Dust from the lane comes in through the gap, and the pane rattles in the frame. New rubber seals both.
A cracked pane in an aluminium window is replaced in the same frame. We take the shutter out, set the new glass and refit it.
Shop doors behind the Laxmi Road shutters
A Laxmi Road shop has a glass door behind its rolling shutter. The door opens all day and must lock before the shutter comes down.
When it stops locking, the door has dropped. We lift it, reset the floor spring or the pivots, and the lock meets its keep again.
A cracked door panel is replaced in toughened glass with the same holes for the fittings. We measure in the morning before the crowd and fit on a day the shop chooses.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































