Flats along the Eastern Express Highway in Vikhroli hear the traffic all night. People think the glass is the problem. Usually the noise comes through the gap between the frame and the wall, and that is what we seal first. In the colonies of Kannamwar Nagar the common call is smaller. An aluminium bathroom door that has dropped and drags on the floor. Both are ordinary Mumbai repairs.
Sealing the frame to the wall against highway noise
A window frame is fixed into a wall with a gap around it. That gap is filled with foam or mortar when the window is fitted. Over the years it cracks or falls out. Noise and dust come straight through it.
We remove the old filling, fill the gap with expanding foam and seal it over with a flexible sealant on both sides. The frame is then tight to the wall again.
Only after that do we talk about the glass. For a highway-facing flat, double glazing in a uPVC frame cuts the noise further. But sealing the frame comes first, and it often makes a bigger difference than people expect.
Aluminium bathroom doors that have dropped
The colony flats of Kannamwar Nagar have light aluminium bathroom doors. After years of use the hinges wear and the door drops. It drags on the floor, and the latch no longer meets the keeper.
We lift the door, replace the hinges and reset the latch. Where the aluminium around the hinge has worn, we fit a reinforcing plate so the new hinge holds.
If the bottom of the door has corroded from standing water, we replace the bottom rail. A new door is rarely needed. The frame and most of the door are usually sound, and the repair is a short job.
Torn mesh and loose glass in the colony windows
Kannamwar Nagar's windows are old aluminium sliders. The mesh shutters have torn, and the glass has gone loose in its rubber.
We fit new fibreglass mesh in the old mesh frame where the frame is straight. Where it has bent, we fit a new frame. New rubber bead around the glass stops it rattling.
Both jobs are done with the shutters out of the frame, so we do rollers at the same time. Tell us every window with a fault, and we do the whole flat in one visit. The visit costs the same for one window or for all of them.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































