Andheri East is Mumbai's industrial suburb, and its repairs show it. The MIDC units have large aluminium sliding doors and windows that carry heavy glass. Saki Naka and Chakala roads put dust into every track. And the flats of Marol have the ordinary faults of a dense suburb. Dragging shutters, torn mesh, and locks that no longer catch.
Heavy aluminium sliders in a MIDC unit
Factory offices in the MIDC often have wide aluminium sliding doors and tall windows. The shutters are heavy, and the rollers under them carry far more weight than a flat's window does.
When such a shutter drags, the rollers have flattened or the track has worn through. We fit heavy-duty rollers made for the weight, not standard ones. Where the track is worn, we fit a stainless track cover.
A cracked pane in an industrial section is replaced with toughened glass of the same thickness. We measure the rebate in the section, since industrial sections take a different glass size from the housing ones.
Road dust in every track from Saki Naka to Chakala
The roads through Saki Naka and Chakala carry heavy traffic and constant work. Fine dust settles in every window track in the flats and offices along them.
Dust grinds the rollers and packs the drain holes in the track. The window then drags, and in the monsoon water sits in the track and comes inside.
We clear the track, open the drain holes and fit new rollers. A brush seal along the shutter keeps most of the dust out afterwards. We suggest it on every window we open along these roads, because the dust will come back.
Window, mesh and lock repairs in Marol flats
The flats of Marol are close together and the windows work hard. The usual calls are a shutter that drags, a mesh that has torn and a lock that does not catch.
We do all three in one visit. New rollers for the shutter. New fibreglass or stainless mesh in the old frame, or a new frame where it has bent. A new lock set to the shutter's position.
List every fault in the flat when you call. The visit costs the same for one window or for all of them. Bringing the right parts for every window means we finish in one trip.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































