Kalamboli gives us two kinds of repair. In the Steel Market, a cabin pane struck by a bar or an aluminium door caught by a loaded trolley. In the Roadpali towers, windows whose tracks are full of iron grit and whose frames carry rust streaks that should not be there. Both come from the same place. The steel moving through the market, and the dust it leaves behind.
A cabin pane struck in a Kalamboli godown
When a bar or a coil catches the office glass, the pane goes. If it was laminated it cracks and holds. If it was toughened it shatters into the office.
We come the same day, clear the glass and board the opening so the cabin can lock that night. The new pane is laminated, cut to size and fitted within days.
If the cabin was glazed in plain or toughened glass, we suggest laminated for every pane facing the stock. One pane failing differently from the rest is the one that hurts someone.
Aluminium doors and trolleys in the Steel Market
The office door in a godown is hit by trolleys, by bars carried past it and by shoulders all day. The frame bends at the hinge side and the door stops latching.
We straighten or replace the hinge section and re-hang the door. A steel kick plate goes along the bottom. The closer is changed for one rated for heavy use.
Where the door opens onto the loading bay, a drop seal keeps monsoon water from running under it into the office.
Rust streaks and gritted tracks in the Roadpali towers
Iron dust settles in the bottom track of a sliding window. It is harder than the aluminium and grinds the track as the window moves. The rollers flatten within a year or two.
We clean the track, fit a stainless track cover and rollers with sealed bearings that grit cannot enter. Brush seals sweep the track as the sash moves.
The brown streaks below a window are iron dust rusting on the frame and running down in the rain. They clean off with a mild acid cleaner made for aluminium. We do that on the same visit and show you how to keep it off.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































