Taloja has two kinds of customer and one long road to both. The MIDC plants run three shifts, and their doors are used every hour of the day. The Phase 2 towers are new flats with windows that need their first adjustment and their first mesh. Because the drive is long, every Taloja repair starts with your photographs and ends with one visit that fixes the whole list.
Doors that work three shifts in Taloja MIDC
A plant door used around the clock wears three times faster than an office door. The closer tires in a year. The hinges loosen. The lock takes a thousand turns a week.
We fit heavy-duty closers and hinges rated for that use, and a lock made for high traffic. A kick plate protects the bottom rail from trolleys.
The repair is done during a shift change or on the plant's off day. A shift door cannot be out of use for long. Where it is faster, we bring a new leaf with the parts already fitted, instead of repairing the old one.
First adjustment and first mesh for the Phase 2 towers
The new windows in the Taloja towers were fitted and left. Hinges need setting, keeps need adjusting, and some locks never engaged.
We walk the flat and set every window and door. Then we fit mesh, a sliding shutter in each window's spare track and a pleated mesh on the balcony door.
The towers face open ground and the MIDC beyond it. Dust is constant. Brush seals in the tracks and sealed-bearing rollers keep the sliders running in it.
Your photographs decide what goes on the van
We ask for two pictures of each fault before we set off. One of the whole door or window. One close up of the broken part.
From those we know the roller profile, the lock type, the closer size and the glass thickness. The van is loaded with them before it leaves.
Cut glass is the one thing that needs a second trip, because it is made to size after measuring. Everything else, from a plant door to a bedroom slider, is fixed on the visit you booked.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.























































