At your location in just 29 minutesGet the measurements right away.T&C

Shower Door Seal Replacement, repairs & installations by Fabrockers

Repairs & Installations · Bengaluru and Delhi NCR

Shower Door Seal Replacement

The strips that keep shower water inside, gone hard and leaking, renewed in under an hour.

₹808/ door starting price₹95015% off

One fixed price per door, supplied and fitted. Nothing is due until you approve the written price.

  • Verified on-site measurement
  • 2-year product warranty, 6 months on the work
  • Fitted by our own team. We never subcontract.

Soft strips run around every shower door. There is a sweep along the bottom edge and a strip down the closing side. Some doors also have a magnetic pair that holds the door shut. These strips keep water inside the shower, and they wear out. Hot water and strong cleaners harden them in time, and then the bathroom floor is wet after every bath. We find the strip that is leaking and fit new seals, cut to your door on site. Book a visit online for a time that suits you, or call or WhatsApp us. We run the shower to see where the water escapes, confirm the price, and reseal the door. New seals start at ₹808 per door, fitted.

Shower Door Seal Replacement is available in Bengaluru, Delhi, Gurugram, Noida, Ghaziabad, Faridabad. The starting rate is ₹808 per door, before GST. Your written quote confirms the measured work and selected fittings.

Service information and prices: Fabrockers. Read the quotation and warranty terms.

Which seal or rubber needs replacing?

Real work · Bengaluru

Repairs and installations we've done

Doors, sliders, shutters, windows and mesh in glass, aluminium, uPVC and wood, on the customer's own site. Tap any photo to see the work.

A Fabrockers fitter lining up a frameless glass door inside a Bengaluru homeA large aluminium sliding glass door in a Bengaluru living roomA fitter working on the hinges of a glass wardrobe shutter in a bedroomA sliding glass shower cubicle door being worked on in a bathroomAn aluminium framed glass door being checked on its hingesA frosted glass door being checked and re-hung after it was fitted out of lineFrosted glass shutters in aluminium frames on a fitted kitchen wall cabinetTwo fitters at an aluminium sliding door and its mesh screen, open on to a balconyA wall of aluminium framed glass windows along an upstairs balcony corridor
Also called
  • shower door seal replacement
  • shower door seal strip replacement
  • shower door bottom seal
  • shower glass seal strip
  • bathroom glass door rubber strip
  • shower door rubber seal replacement
  • bathroom glass door rubber strip fitting

Problems this fixes

Start from what is going wrong. Each page explains the causes, and what each fix costs.

Common questions

Water leaks out under my shower door onto the bathroom floor. Which seal is that?

Usually the bottom sweep. It is the strip that wipes along the edge of the shower floor, and it works hardest and wears first. When its lip hardens or tears, water runs under the door at every shower. It is also the quickest strip to replace. If the puddle is at one corner only, the door may be hanging crooked as well. We check that on the visit.

How often do shower door seals need replacing?

It depends mostly on how the bathroom is cleaned. Hot water ages the PVC slowly and steadily. Acid tile cleaners and neat bleach age it much faster. With a neutral cleaner and an occasional rinse, the strips last much longer. When a strip turns yellow and stiff, or water starts escaping, it is time to change it.

Can I cut and fit shower door seals myself?

The material is sold by the metre, so you can. But the profile has to match your gap and glass thickness. The corners must be cut so they do not spray water out. And a strip fitted to a sagging door seals nothing. If you want the floor dry the first time, book the visit.

My shower door no longer clicks shut. Is that the magnet?

Yes. Magnetic strips hold the door with a soft click. When the PVC around the magnet hardens, the two halves stop meeting flat. The door then drifts open and leaks along its closing edge. We replace the pair together, both sides, and the click and the seal come back.

After resealing, how do I make the new strips last?

Two habits help. Clean the glass with a neutral bathroom cleaner, and keep acid and neat bleach away from the strips. Once a week, lift the bottom sweep gently and rinse the grit out from under it, because trapped grit tears the lip.

Is this the right service for your job?

Choose this when worn shower door strips let water through the closing edges.

The seals a shower door carries, and which one is leaking

The bottom sweep does most of the work. It closes the gap under the door and wipes the edge of the shower floor. When it hardens or its lip tears, water runs straight out under the door. A puddle along the door's bottom edge points here.

The closing-edge strip seals the gap where the door meets the fixed panel or the wall. When it hardens, it leaves a slot that spray comes through. A wet line on the floor in front of the closing edge points here.

Magnetic strips, on doors that click shut, both seal the door and hold it. When they age, the door neither seals nor stays shut.

We start the visit by running the shower and watching where the water goes.

Why strong bathroom cleaners wear seals out early

The strips are clear PVC. Two things age them: hot water, which cannot be avoided, and strong cleaning chemicals, which can.

Acid-based tile cleaners and undiluted bleach attack PVC directly. The strip yellows, then stiffens, then cracks along the fold where it flexes. Strips in bathrooms cleaned often with strong acid wear out sooner.

You do not have to live with dirty glass. Neutral bathroom cleaners remove soap film without harming the PVC. After a reseal, we tell you which cleaners to avoid.

The reseal visit

The old strips come off, and we clean scale and residue from the door edge. On the bottom edge, that crust stops a new sweep sitting straight, so the cleaning matters.

We cut new strips from fresh rolls to your door's exact width and height. The strips come in shapes for different gap sizes and glass thicknesses. We match them to 8mm, 10mm and 12mm shower glass.

Before fitting, we check why the gap is the size it is. A door sagging on worn hinges has a wedge-shaped gap that no straight strip can seal. If that is your door, we level it first, or tell you what it needs.

What resealing costs

A full reseal of one door, bottom sweep and closing strips, starts at ₹808 fitted. A magnetic closing pair is priced as its own part, when the door uses one.

A second door, or the strips on the fixed panels, add a little on the same visit. The strips themselves are not expensive, so doing every strip in the bathroom at once is sensible.

The strips press on without glue, so you can use the shower the same day. If we have also used silicone anywhere, it needs about 24 hours before the shower is used.

Closely related services

Related pages

Every area we fit repairs & installations in, city by city, and what the work costs.

Repairs & Installations in Delhi NCR

Get this done at your place

We measure on site in Bengaluru and Delhi NCR. A firm price before any work starts.

  • Toughened safety glass, at the thickness stated in your written quote.
  • The fittings, finish and supplied parts are named before you approve the job.
  • We source the glass and fittings against the specification in your written quote.
  • We check the quality before we leave. Most jobs are done in 3 to 4 days.
  • No hidden fees. GST is shown as its own line on the quote.
  • Your details stay protected and confidential on a secure connection.
  • You get dedicated support after fitting, from the same team every time. They are dependable.
  • Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.
Chat on WhatsApp