At your location in just 29 minutesGet the measurements right away.T&C

Glass Door Hinge Replacement, one of the jobs we do for showrooms

For showrooms · Indiranagar, Bangalore

Front Glass, Glass Door & Railing Repairs for Showrooms in Indiranagar

Stair railing, display glass and entrance door repairs for showrooms in Indiranagar, on 100 Feet Road and CMH Road.

Car and bike showrooms, furniture, tile, lighting and electronics showrooms.

  • Night or Sunday work on request
  • 2-year product warranty, 6 months on the work
  • Fitted by our own team. We never subcontract.

Showrooms in Indiranagar

100 Feet Road · CMH Road · Defence Colony · 12th Main

Some showrooms on 100 Feet Road in Indiranagar show their stock over two floors. The stair and the upper floor edge then carry a glass railing. Customers hold it and lean on it, so a rocking panel needs attention soon.

The cause is usually inside the clamp, the metal piece gripping the glass. Its rubber pad shrinks and the grip goes. We go along the whole run, fit fresh pads and replace any cracked clamp. One visit is normally enough.

We also make display glass for these floors. Shelves, table tops and mirrors are cut and polished to your sizes. On CMH Road and 12th Main, tell us if the unit is a converted house. Stairs in those can be narrow, which limits the panel size.

How we work in a running showroom, and the questions showrooms ask

Prepare a clear brief for your showroom

Use this checklist for your own premises. Access rules, installed products and approvals need confirmation at the site.

Measure the display frontage and its delivery route

Mark fixed glass, moving doors, display units and the space needed to bring products through the entrance. Confirm door swing and clear opening before choosing panel divisions. Measure the route used to deliver the glass as well as the final opening.

Identify any signage, lighting, security contacts or finishes that meet the frontage. Agree which contractor handles each interface. A new panel may require different holes or cut-outs; these must be finalized before toughening rather than adapted on site afterwards.

Check entrance hardware against the actual door

Record the fault and how the door is used. A closer or hinge must be compatible with the door size, weight and arrangement. Ask which existing parts remain and whether the lock and floor clearance will be checked together. A stronger-sounding product name does not establish suitability.

Agree protection and handover around the display

Arrange clearance of stock and a protected work area before installation. Confirm how the frontage will be secured during any interruption. Test movement, closing and locking at handover, and record any outstanding finishing or signage work before the display is reopened.

Compare a complete scope, not just a starting rate

The catalogue shows starting prices in each service's unit. A per-piece rate and a per-square-foot rate describe different quantities. Ask the quote to state the measured quantity, material specification, fittings, finish, labour and GST separately. Identify removal, disposal, access equipment and making-good work explicitly.

For repairs, ask which existing parts will remain and which will be changed. For new glass, agree dimensions, holes, cut-outs, edge finish and hardware positions before production. If the scope changes after the visit, obtain the revised price before the additional work starts.

Check the finished work before handover

Operate the repaired door or window with the fitter present. Check movement, latching, handle operation and the finish around replaced parts. For a shower or sealing repair, agree the appropriate leak check and any curing time before use. Do not assume that a visual inspection proves a performance rating.

Keep the itemized invoice, the named product or fitting and the care instructions. Record any remaining work and the contact for follow-up. Do not attempt to adjust heavy glass panels or replace unfamiliar hardware yourself if the movement changes after fitting.

Product guidance to discuss at the survey

What we repair and fit for showrooms in Indiranagar

Every job shows its live starting price. You get a written price before work starts.

Related pages

Book a visit to your showroom in Indiranagar

Or send a photo first. You get a written price before any work starts.

  • Toughened safety glass, at the thickness stated in your written quote.
  • The fittings, finish and supplied parts are named before you approve the job.
  • We source the glass and fittings against the specification in your written quote.
  • We check the quality before we leave. Most jobs are done in 3 to 4 days.
  • No hidden fees. GST is shown as its own line on the quote.
  • Your details stay protected and confidential on a secure connection.
  • You get dedicated support after fitting, from the same team every time. They are dependable.
  • Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.
Chat on WhatsApp