The Camp is Pune's old shopping heart. MG Road, Camp and East Street are lined with cantonment-era buildings whose shops have tall openings and thick walls. The offices above and behind them have the same tall rooms. We fit glass fronts that use that height, and partitions that respect walls which were never straight.
Tall shop fronts on MG Road, Camp
An old shop on MG Road, Camp often has an opening that runs well above head height. A glass front here looks its best when it uses the whole opening.
We fit a frameless front in tall toughened panels with a glass door in the middle. A transom bar across the top, a slim horizontal frame, lets us split the height into two panels where one would be too tall to carry in.
The pavement outside is busy and parking is hard. We deliver before the shops open and carry the panels straight in.
Partitions against thick cantonment walls
The walls of these buildings are thick and the plaster has been patched many times. A wall channel does not sit flat against them.
So we scribe the channel to the wall. That means we mark the wall's shape on the channel and cut the channel to follow it. The glass then sits in a channel that touches the wall along its length.
For an office cabin in such a room, we keep the frosting low and the clear glass high. The tall windows of these buildings give good light, and a frosted band at the top would waste it.
A showroom on East Street: counters, fronts and a back office
East Street has showrooms that need more than a front. A glass display counter, a glass shelf wall, and a small glass cabin at the back for the owner.
We make the counter top in toughened glass with polished edges and a glass front. The shelves go on steel brackets set into the wall.
The back office cabin gets a frosted band so the owner can watch the shop without being watched. All of it is measured in one visit and fitted on the days the shop is closed, if you prefer.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.




