Deccan Gymkhana is where Pune's old bungalows became clinics, consulting rooms and small offices. Prabhat Road and Bhandarkar Road are lined with them. The rooms are tall, the beams are exposed, and the floors are old stone or tile. A glass partition here has to work with a house that was built for a family, not for a waiting room.
Partitions under a bungalow ceiling
The ceilings in these bungalows are tall. A partition that runs to the ceiling needs a tall panel, and a tall panel needs thicker glass.
So we often stop the glass at a set height and close the gap above with a slim frame and a fixed panel. The room stays one room for air and light. The cabin below is private.
Old beams are rarely level along their length. We take the ceiling line at several points and make the top channel follow it. The glass is cut to each reading.
A clinic on Prabhat Road: waiting room and consulting room
A clinic in a converted house usually puts the waiting room in the old front hall and the doctor in a room behind. The partition between them does two jobs. It keeps the consultation private, and it lets the receptionist see the waiting room.
We frost the glass from the floor to above head height on the consulting side. We leave a clear band at the top so daylight passes through.
The door gets a soft-closing hinge, not a floor spring. A floor spring needs a hole cut in the floor, and old stone floors do not take that well.
Working in a house under old trees
Deccan Gymkhana's roads are shaded by old trees and the gates are narrow. A large vehicle cannot always reach the door. We bring the glass in a smaller vehicle, or we carry the last stretch by hand.
The compound usually has other tenants, or the owner lives upstairs. We agree the working hours with them and keep the cutting and drilling outside.
Stone floors mark easily. We lay boards along our route from the gate to the room before the first panel comes in.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.




