The older flats of Pimpri, Morwadi and Kalewadi were built with the bath room and the WC as two separate small rooms. The bath room is tiny, with a door of its own, and the whole of it gets wet. The water comes from a tank on the roof with no pump, so the pressure is gentle. And the room has one small window or none. Shower glass in a room like that is a different job from a tower bathroom, and we plan it as one.
Glass in a separate bath room in Pimpri
When the bath room is its own small room, there is no basin or WC to keep dry. The question is where the dry patch goes. A place to stand and dress, and a corner for the bucket and the washing.
So we fit a single panel the width of the room, with a gap at one end to walk through. The shower side gets wet. The door side stays dry. A towel hangs on the dry side and does not get soaked.
The panel is toughened glass in a floor channel and a wall channel. In a room this small there is no need for a door, and a door would have nowhere to swing.
Low tank pressure in a Kalewadi lowrise flat
A flat in a Kalewadi lowrise fed by a roof tank has gentle water. The shower does not spray far. That changes the glass.
We do not need a tall panel. The splash is low and short. A standard-height panel does the job, and a shorter one leaves more of the little room feeling open.
If you later fit a pump, the splash changes and the panel may be too low. We ask about that at the visit. It is better to fit for the pressure you will have than the pressure you have today.
Clear glass for a Morwadi bathroom with little light
The bath rooms in Morwadi's older buildings often have one small window onto a shaft, or none. A frosted panel in a dark room makes a dark corner darker.
So we suggest clear glass. The little light there is crosses the room through it. A small room with clear glass reads as one space and feels bigger than it is.
If privacy from the door matters, a frosted band at chest height does it without closing the room in. We hold the samples up in the room at the measuring visit, so you see the difference in your own light.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















