Chinchwad has two kinds of bathroom. The compact ones in the old company housing and the societies near Chinchwad Station and Bijlinagar, with a geyser and its pipes running down the shower wall. And the new ones in the Thergaon towers, tiled and empty, waiting for glass. We fit both. The first is about working around what is on the wall. The second is about getting the glass in before the family moves in.
Glass cut around the geyser pipes in Chinchwad company housing
In the older flats of Chinchwad, the geyser hangs on the shower wall and its pipes run down the tile, in the open. The shower glass has to meet that wall somewhere, and the pipes are in the way.
We plan the enclosure so the fixed panel lands on clear tile. Where that is not possible, the panel is cut with a notch around the pipe. Toughened glass can be cut like that before it is toughened, and the notch is polished.
The geyser itself needs room above and below for its service. We keep the glass clear of it and mark the position at the measuring visit. Moving the geyser is a plumber's job and usually not worth it.
New tower bathrooms in Thergaon
The Thergaon towers hand over bathrooms with tiles and a drain and nothing else. The owner fits the shower glass before moving in. The walls are true, the tiles are new and the choice is open.
Frameless glass suits these rooms. Thick toughened panels on steel fittings, with no aluminium frame to collect dust. A hinged door where the room has the swing, a sliding one where it does not.
We measure once the tiles are grouted and the sanitary fittings are in. Then the glass is made and fitted in a day. If the painter is still working, the glass goes in after the paint, not before.
The grey dust of the industrial belt on shower glass
Chinchwad's air carries a fine grey dust from the units and the roads between them. It gets into every flat with an open window and settles on wet shower glass as a grey film.
A protective coating on the glass makes the film easier to wipe off. Dust and water run off together rather than drying on. A soft cloth once a week keeps it clear.
For the fittings, we use a sealed finish. Grit in an open hinge grinds it as it turns. A sealed hinge wipes clean and keeps turning. It is a small choice at the start and it decides how the enclosure feels in a few years.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















