Bhandup is where factories have become tower societies, and where old societies still stand between them along the LBS side. In a new tower flat the enclosure should be fitted before you move in. An old society bathroom was built as a wet room. There the glass turns one wet room into a dry half and a wet half. We do both across this part of Mumbai.
Fitting the enclosure before you move in
A new flat in one of Bhandup's tower societies is easiest to fit while it is empty. There is no furniture to protect, and the other trades are still coming and going.
We come after the tiler has finished and the plumber has fixed the shower and the drain. Not before. The glass is cut to the finished tiles, and it must sit where the drain is.
We coordinate the date with your contractor. The enclosure goes in, the silicone sets, and the flat is ready for you. Moving in with the shower already working is the whole point of doing it this way.
Turning an old wet room into dry and wet
The old society bathrooms of Bhandup were built as one wet room. The whole floor gets wet with every shower. The WC seat is wet, the towel is wet, and the floor stays slippery for hours.
A fixed glass panel or a cubicle divides the room. The shower side gets wet. The WC and basin side stays dry.
The floor usually slopes to one drain. The glass line follows that slope, so water does not run under the glass to the dry side. Where it would, we add a low threshold strip under the glass. We work this out on the floor at the measuring visit.
When the shower wall is the neighbour's wall
In many Bhandup societies the shower wall is shared with the flat next door. Drilling into it is heard next door, and some societies have a view on it.
We keep the drilling short and in the middle of the allowed hours. We tell you when it will happen, so you can warn your neighbour. The holes are shallow, for the wall channel only.
Where a society prefers no drilling into a shared wall, we fix the glass to the floor and the opposite wall instead. A stabiliser bar at the top holds it. It depends on the layout, and we say which is possible at the visit.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















