Kurla is one of the most tightly built parts of Mumbai. The bathrooms are among the smallest we fit. The lanes are too narrow for a van. The ground floors near the Mithi river take water in the monsoon. Each of those changes how a shower enclosure is designed and fitted. None of them stops it being done.
A single panel for a very small Kurla bathroom
Many Kurla bathrooms are too small for a cubicle of any kind. The shower, the WC and the basin share one small room.
The answer there is a single fixed glass panel. It stands between the shower and the rest of the room, with a gap to walk through. There is no door, so nothing needs space to open.
The panel keeps the WC and the floor outside it dry, which is what most families want. It is one piece of toughened glass, held by a wall channel and a floor channel. The size is cut to your room, so no bathroom is too small for it.
Fixings for a ground floor that floods
Ground-floor flats in Kurla near the river can take water in a heavy monsoon. A shower enclosure there stands in that water for hours.
So we use stainless steel fixings throughout, including the screws inside the channels, which are usually plain steel. Plain steel rusts after one flood and stains the floor.
We also raise the glass a little above the floor on stainless packers inside the channel. Water drains out of the channel instead of sitting against the glass edge. After a flood, the glass only needs a rinse and a wipe.
Carrying glass down a lane the van cannot enter
Many Kurla buildings stand on lanes too narrow for a van. The glass is carried by hand from the nearest road, sometimes a long way.
So at the measuring visit we also walk the route from the road to your door. That walk decides the panel sizes. A very long panel is hard to carry round the corners of a lane and up a stair.
Where the route is tight, we make the enclosure from two smaller panels with a slim joint. Nothing is made until the route has been walked. Tell us the nearest point a van can reach when you book.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















